h3. RadSec: Using radsecproxy as an add-on to an existing RADIUS server
h4. Goals and Prerequisites
This section describes a trimmed-down installation of radsecproxy which enables it to augment any RADIUS
server with a RadSecRADIUS/TLS transport. More precisely, itwith willthis forcesetup aradsecproxy server towill:
* Accept requests from a RADIUS server running on the same host.
* Unconditionally forward the requests via RadSecRADIUS/TLS to an upstream server (typically a FLRSfederation-level or a regional
proxy server).
* Accept requests via RadSecRADIUS/TLS from the upstream server.
* Unconditionally forward these requests to a RADIUS server running on the same host.
The prerequisites for this deployment are:
* radsecproxy version 1.4.12 or higher
* The local RADIUS server's DEFAULT realm is configured to forward requests to the radsecproxy port
on localhost.
* The local RADIUS server has configured localhost as a client (this is typically the case).
* The deployment requires a server certificate and a private key for that certificate to establish the
RadSec connection which designates the server as an aeduroam service\-SP and identity provider:
(urn:geant:eduroam:component:sp:Europe:<FedName>:<id>
urn:geant:eduroam:component:idp:Europe:<FedName>:<realm>)IdP. For further information regarding eduroam certificates see [this section|H2eduroam:radsec certificates].
h4. Sample configuration
Most of the radsecproxy configuration file is static. Therefore, a template configuration file is provided at [http://www.eduroam.org/downloads/docs/eduroam-cookbook-scripts.zip]. A detailed explanation of this
configuration file follows, but if you are unwilling to read it all, the comments should make the configuration file
almost self-explanatory and you can start and experiment with it right after the initial installation, which is
explained below.
h4. Installation
# On UNIX-like systems, the installation is very simple. The code can be downloaded at
\[http://software.uninett.no/radsecproxy/\]. After unpacking it into its base directory, descend into the unpacked directory and type
_make_
The code is ISO C and should compile cleanly. It usually does not require a ./configure.
2. After compiling, the executable:radsecproxy is located in the base directory. Either run this executable here
or copy it to a convenient location (e.g. /usr/local/bin) and run it there.
Execution does not require root rights. It expects its configuration file to be in:
_/etc/radsecproxy.conf_
3. Create the directory _/etc/radsecproxy.d/certs/ca/_. The template configuration file requires this directory to
contain the accredited CA root certificates and the corresponding Certificate Revocation Lists (CAs) in
their OpenSSL hash form.
4. Currently, two CAs are accredited for eduroam. These two certificates and their CRLs need to be
copied into this directory. For your convenience, we have prepared a script at
[http://www.eduroam.org/downloads/docs/eduroam-cookbook-scripts.zip] which you can execute in the
directory. It will download and hash the appropriate files. In this case you can skip steps 7 and 8.
5. If you want to download the files manually, download them from these URLs:
* [http://sca.edugain.org/cacert/eduGAINCA.pem]
* [http://sca.edugain.org/cacert/eduGAINSCA.pem]
* [http://pki.edugain.org/edugainca/crl/cacrl.pem]
* [https://sca.edugain.org/crl/cacrl.pem]
6. After downloading, execute the following command in the /etc/radsecproxy.d/certs/ca/ directory:
\_c_rehash .\_
(including the dot) to generate OpenSSL hashes of the downloaded files.
7. Make sure that the CRL files are regularly re-downloaded. This can for example be done by executing
the download script regularly with cron. CRLs have a limited validity time themselves -- not regularly
refreshing the CRLs will eventually cause certificate validation to fail\!
8. Copy the template configuration file into /etc/radsecproxy.conf.
9. Fill the lines marked with __STUFF_\_.
10. Start radsecproxy and enjoy (for first-time use, starting it with the \--f option is recommended, it will start
radsecproxy in the foreground and show some verbose startup messages).
h4. Detailed explanation of configuration
This section goes through the template radsecproxy.conf line by line and explains the meaning of each stanza.
_ListenUDP localhost:11812_
_ListenTCP \*:2083_
Since there is a RADIUS server on the same host that occupies UDP/1812, radscproxy has to listen on a nonstandard
port. It only needs to listen on the loopback device since it will only communicate with the RADIUS
server on the same machine. The choice of 11812 is arbitrary and can be adapted if that port is in use. Since
radsecproxy will also accept requests from an upstream RadSec-enabled server, it listens on the default TCP
port for RadSec (2083) for requests from outside (the * meaning: all interfaces). If you want radsecproxy to
listen only on specific interfaces, enter the interface names here. Beware: in this case you may also have to set
the more exotic option SourceTCP (see the man page of radsecproxy for details).
_LogLevel 3_
\_LogDestination [file:///var/log/radsecproxy.log\_|file:///var/log/radsecproxy.log_]
A logging level of 3 is the default and recommended log level. Radsecproxy will then log successful and failed
authentications on one line each. The log destination is a typical POSIX-compliant log location.
_LoopPrevention On_
This enables a semi-automatic prevention of routing loops for RADIUS connections. If you connect a client {...\]
and a server {...} and give them the same descriptive name, the proxy will prevent proxying.
_tls default {_
_ CACertificatePath /etc/radsecproxy/certs/ca/_
_ CertificateFile /etc/radsecproxy/certs/_{_}CERT_PEM_\_\_
_ CertificateKeyFile /etc/radsecproxy/certs/_{_}CERT_KEY_\_\_
_ CertificateKeyPassword \__CERT_PASS_\_\_
_ CRLCheck On_
_}_
This section defines which TLS certificates should be used by default. This installation of radsecproxy always
uses the same certificates, so this is the only TLS section. CACertificatePath contains the eduroam-accredited
CA certificates with filenames in the OpenSSL hash form. The parameters below need to be adapted to point to
your server certificate in PEM format, the private key for this certificate and the password for this private key if
needed, respectively. If no password is needed for the private key, you can comment this line (i.e. precede it
with a # sign). The option CRLCheck validates certificates against the Certificate Revocation List (CRL) of the
CAs. It requires a valid CRL in place, or else the certificate validation will fail. Therefore, it is important to
regularly update the CRLs by re-downloading them as described above.
_rewrite defaultclient {_
_ removeAttribute 64_
_ removeAttribute 65_
_ removeAttribute 81_
_}_
This section deletes attributes from RADIUS requests that convey VLAN assignment information. If VLAN
information is sent inadvertently, it can cause a degraded or non-existent service for the end user because they
might be put into the wrong VLAN. If you do have a roaming use for cross-institution VLAN assignment, you
may want to delete this stanza.
_Client localhost {_
_ host 127.0.0.1_
_ type udp_
_ secret \__LOCAL_SECRET_\_\_
_}_
_client ::1 {_
_ type udp_
_ secret \__LOCAL_SECRET_\_\_
_}_
To accept requests from the RADIUS server on localhost, this server needs to be listed as a client. That server
may either use IPv4 or IPv6 for its communication, so both variants are defined. If your system is not IPv6\-
enabled, simply delete the stanza about client ::1. The __LOCAL_SECRET__ must match the secret which
you configured in your RADIUS server for the server catering the DEFAULT realm.
_client \__RADSEC_PEER__ {\__ type TLS{_}_ secret mysecret{_}_}_
To accept requests from the upstream RadSec-enabled server, this other server needs to be listed. Replace
__RADSEC_PEER__ with the hostname of your upstream server. The traditional RADIUS shared secret has
no meaning in RadSec and can be statically set without security implications. In current eduroam deployments,
it is set to mysecret. This may change in the future, but will be announced in due time ahead.
_server localhost {_
_ type UDP_
_ port 1812_
_ secret \__LOCAL_SECRET_\_\_
_}_
To deliver requests to the local RADIUS server, this server needs to be configured. See above for the
parameter __LOCAL_SECRET_\_.
_server \__RADSEC_PEER__ {\__ type TLS{_}_ secret mysecret{_}_ statusserver on{_}_}_
This server needs to be configured to deliver requests to the upstream RadSec-enabled server. See above for
the configuration item __RADSEC_PEER_\_.
_realm /myabc\.com$ {_
_ replymessage "Misconfigured client: default realm of Intel PRO/Wireless supplicant\!"_
_}_
_realm /\[radsecproxy-addon^@\] {_
_ replymessage "Misconfigured client: empty realm\!"_
_}_
There are some known client-side misconfigurations. If they were not already caught by the local RADIUS
server, it does not make sense for the proxy to send these requests up to the eduroam infrastructure. These
requests are immediately rejected.
Note: if you need to blacklist an existing realm for some reason, you can follow the myabc.com example,
copying and replacing it with the realm to be blacklisted.
_realm /_{_}OWN_REALM{_}_$ {_
_ server localhost_
_}_
Requests that are coming in from upstream and are supposed to be handled by the own RADIUS server are
listed in __OWN_REALM_\_. Create multiples of these stanzas if your local server serves more than one realm.
Within the RADIUS infrastructure, it is possible to misconfigure a server so that eternal loops are created, which
may ultimately lead to a DoS condition. The basic problem is: assume a RADIUS server with its own realm
something.org. Further, assume a user who entered john.doe@sub.something.org. A server that only checks if
the realm is equal to something.org will send this request upstream to the eduroam infrastructure. The
infrastructure will in turn detect that the realm ends in something.org and will send the request back to where it
came from, which closes the loop.
The configuration stanza above will terminate all requests that end in __OWN_REALM__ but which were not
caught by previous realm definitions, which prevents the loop. This is achieved by having the client name =
localhost and the server name = localhost, and LoopPrevention enabled, which checks for this condition.
_realm * {_
_ server \__RADSEC_PEER_\_\_
_}_
h3. Obtaining RadSec certificates
IdP and SP certificates are issued by the NRO. Please contact your NRO for more information on how to obtain
a certificate. |