Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Update doc status

...

  • focus on the integration aspects of the blueprint architecture 

  • provide recommendations and guidelines for implementers, service providers and infrastructure operators on implementing scalable and interoperable AAIs across e-infrastructures and scientific communities

  • work in close collaboration with the policy, pilots, and the training and outreach activities of AARC2

  • work on the evolution of the blueprint architecture, with a focus on identity provider / service provider (IdP/SP) proxies, scalable authorisation solutions for multi-service provider environments and other solutions for integrating with R&E federations and cross-sector AAIs

 

Documents


Final

Guidelines

IDTitleSummaryLinksStatus

AARC-G002

Supersedes: AARC-G001 (June 13, 2017)

Other identifiers:

AARC-JRA1.4A)

Guidelines on expressing group membership and role information

This document standardises the way group membership information is expressed. It defines a URN-based identification scheme that supports: indicating the entity that is authoritative for each piece of group membership information; expressing VO membership and role information; representing group hierarchies.

AARC-JRA1.4A (201710) [PDF]

Older versions

AARC-JRA1.4A (1.0) [PDF]

Status
colourGreen
titleFinal

Status
colourBlue
titleAEGIS

AARC-G003

Other idenftifiers:

AARC-JRA1.4B

Guidelines on attribute aggregationThis document discusses attribute aggregation scenarios applied in international research collaborations. Attribute aggregation can take place at proxy, SP or TTS services, in-line with the Blueprint Architecture.PDF

Status
colourGreen
titleFinal

AARC-G004

Other idenftifiers:

AARC-JRA1.4C

Guidelines on token translation servicesThis document discusses attribute aggregation scenarios applied in international research collaborations. Attribute aggregation can take place at proxy, SP or TTS services, in-line with the Blueprint Architecture.PDF

Status
colourGreen
titleFinal

AARC-G005

Other idenftifiers:

AARC-JRA1.4D

Guidelines on credential delegationIn distributed environments it is often necessary for a remote service to access other services on behalf of a user, or for a software agent to act on behalf of the user. This guidelines consider delegation of credentials based on signed assertions, session tickets, “tokens” of various types, and proxy certificates.PDF

Status
colourGreen
titleFinal

AARC-G006

Other idenftifiers:

AARC-JRA1.4E

Best practices for managing authorisation

This document provides best practices for a range of models for Authorisation policy enforcement that apply at service providers end-points, even if not always solely on the resource SP alone, e.g. in the case of an IdP/SP proxy.PDF

Status
colourGreen
titleFinal

AARC-G007

Other idenftifiers:

AARC-JRA1.4F

Guidelines on non-browser accessOverview of non-web access mechanisms in common use for both interactive (command-line) access and for API based access. Mechanisms based on ssh, PKIX/X.509, API keys and OIDC are reviewed and placed in context.PDF

Status
colourGreen
titleFinal

AARC-G008

Other idenftifiers:

AARC-JRA1.4G

Guidelines for implementing SAML authentication proxies for social media identity providersThis guidelines provides recommendations and best practices for implementing authentication proxies that can connect social media identity providers with federated SAML 2.0 service providers.PDF

Status
colourGreen
titleFinal

AARC-G009

Other idenftifiers:

AARC-JRA1.4H

Account linking and LoA elevation use cases and common practices for international research collaborationIn Identity linking (account linking) the user’s infrastructure identity is associated with external identities, i.e. created and assigned outside of the administrative boundaries of the infrastructure, such as institutional IdPs or social media IdPs. This linking may be either implicit or explicit to the user. The document reviews use cases and considers consistency of representation, accounting, and traceability of linked identities.PDF

Status
colourGreen
titleFinal

AARC-G010

Other idenftifiers:

AARC-JRA1.4I

Best practices and recommendations for attribute translation from federated authentication to X.509 credentialsThis guideline suggests the common way to encode authentication and authorization in X.509 credentials, to increase the re-usability and interoperability of X.509 credentials generated by token translation services.PDF

Status
colourGreen
titleFinal

AARC-G021

(was AARC2-JRA1.1A)

Guideline on the exchange of specific assurance information between InfrastructuresInfrastructures and generic e-Infrastructures compose an ‘effective’ assurance profile derived from several sources, yet it is desirable to exchange the resulting assurance assertion obtained between Infrastructures so that it need not be re-computed by a recipient Infrastructure or Infrastructure service provider. This document describes the assurance profiles recommended to be used by the Infrastructure AAI Proxies between infrastructures.

Wiki

doc

Website

Status
colourGreen
titleFinal

Status
colourBlue
titleAEGIS

AARC-G027Specification for expressing resource capabilitiesThis document provides a specification for expressing resource-specific capabilities using entitlements. A capability defines the resource or child-resource a user is allowed to access, optionally specifying certain actions the user is entitled to perform. Capabilities can be used to convey - in a compact form - authorisation information.PDF

Status
colourGreen
titleFinal

Status
colourBlue
titleAEGIS

AARC-G029

(was AARC2-JRA1.2C)

Guidelines on stepping up the authentication component in AAIs implementing the AARC BPAA number of research community use cases require users to verify their identity by using more than one type of credentials, for instance using password authentication, together with some physical object such as a phone or usb stick that generates tokens/pins, etc. At the same time, there are services that may require an already logged in user to re-authenticate using a stronger authentication mechanism when accessing sensitive resources. Authentication step-up is then needed to improve the original authentication strength of those users. This document provides guidelines on step-up of the authentication component. It covers requirements and implementation recommendations, describes a proposed authentication step-up model, and outlines related work and documentation.

Wiki

Website


Status
colourGreen
titleFinal

AARC-G031

(was AARC2-JRA1.3A)

Guidelines for the evaluation and combination of the assurance of external identities

The Research Infrastructures (from now on just Infrastructures) that follow the AARC Blueprint Architecture [AARC-BPA] set up their own AAI to grant access to their services. The AAI is typically based on a central IdP-SP proxy that act as a gateway for the Infrastructure services and resources. In order to assign an identity to the users of the research collaboration or the community they serve, Infrastructures rely on external Identity Providers and employ identity linking strategies.

The Infrastructures also define one or more assurance profiles, or a combination of assurance components, tailored to a specific risk assessment [AARC-G021].

In order to assign an assurance profile to a user, the Infrastructure shall evaluate the assurance components of the linked identity, or identities, used to register to the Infrastructure’s AAI or used during authentication at the infrastructure proxy. These guidelines provide a method to combine assurance information and to compensate for the lack of it.

Wiki

pdf

working doc

Status
colourGreen
titleFinal

Status
colourBlue
titleAEGIS

Deliverables

IDTitleSummaryLinks

Anchor
AARC2_DJRA1_2
AARC2_DJRA1_2
AARC2-DJRA1.2

Authorisation Models for SPs

This deliverable describes possible authorisation models for SAML-SPs and OIDC-RPs in a proxied environment. We provide an overview about available and upcoming technologies currently in use or development for community and research infrastructures.

pdf

AARC2-DJRA1.1Use-Cases for Interoperable Cross-Infrastructure AAIThe researchers’ need to access online services and resources offered by different research and e-infrastructures has increased over the last years. Through federated access, researchersshould be able to seamlessly and securely access resources across these infrastructures using their existing credentialsfrom their home organisations. AAI interoperability a key requirement to support this. The AARC blueprint architecture has been designed to address this need, aiming to improve the user experience when accessing and sharing resources provided by different infrastructures. To this end, this document analyses research community use cases that require access to services and resources across infrastructures. The research community specific use cases have been mapped to a set of generic use cases of cross-infrastructure AAI flows. These flows will serve as input for further refining and complementing where needed the AAI interoperability aspects of the AARC Blueprint Architecture.pdf
AARC2-DJRA1.3VO Platforms for Research CollaborationsIn order to scale the users’ use of research infrastructures, cyber- and e-infrastructures, it makes sense to introduce a “virtual organisation” (VO) that can unify users with a shared purpose or research activity. This document investigates this use of the VO and makes recommendations for the platform which maintains this VO information, both for the VO’s own use but particularly for the VO’s members’ use of the infrastructure.pdf


Active Drafts

Deliverables

IDTitleSummaryLinksStatus






Guidelines

IDTitleSummaryLinksStatus
AARC-G045Evolution of the AARC Blueprint Architecture and best practices to support cross-infrastructure AAI interoperabilityThis document provides the first iteration of the AARC Blueprint Architecture (AARC-BPA-2018) including the "community-first" approach.Google doc

Status
colourYellow
titleFinal Call

AARC-G025

(AARC2-JRA1.1E)

Guidelines for expressing affiliation information across infrastructures

This document describes the semantics associated with the use of the affiliation attributes eduPersonAffiliation and/or eduPersonScopedAffiliation when these are asserted by an Infrastructure Proxy when communicating to connected service providers and other Infrastructure Proxies.

Wiki

doc

The goal of this document is to define how affiliation information should be expressed when transported across AARC BPA-compliant AAIs. Two different types of affiliation have been identified, namely Affiliation within the Home Organisation, such as a university, research institution or private company; and Affiliation within the Community, such as cross-organisation collaborations. Both affiliation types should be communicated to the service providers that rely on affiliation information in order to control access to resources.

Wiki

doc

pdf

Status
colourYellow
titleFINAL CALL

AARC-I047

(was AARC2-JRA1.2A)

Implementing scalable and consistent authorisation across multi-SP environments
In Progress

AARC-I047

(was AARC2-JRA1.2A)

Guidelines for scalable and consistent authorisation across multi-SP environmentsManaging authorisation at each SP individually does not scale (although in some case it might be required). This document provides guidelines on how one can manage authorisation across multiple SPs, possibly operated by different entities. For some cases centrally managed entitlements (conveying group/role membership for example) might be more than enough.WikiThe purpose of this document is to provide information to infrastructures for efficiently implementing access restrictions that are required by the individual communities and e-Infrastructures. The suggestions are given within the setting of the AARC BPA. In this scenario, user communities make use of an SP-IdP-Proxy (including User Attribute services) in order to manage access to resources (end services). The suggestions given address two different topics. One is about providing an interoperable schema to use for expressing authorisation information. This is an extension of the recommendations provided in AARC-G002 - Expressing group membership and role information and AARC-G027 - Specification for expressing resource capabilities. The other topic concerns the organisational architecture for conveying authorisation information. All information within this latter area are derived from the more detailed Deliverable DJRA1.2 on authorisation models.

Wiki

pdf

Status
colourYellow
titleFinal call

AARC-G049A specification for IdP hinting

This document defines a generic browser-based protocol for conveying - to services - hints about the IdPs or IdP-SP-proxies that should be used for authenticating the principal. This protocol, colloquially referred to as Identity Provider (IdP) hinting, can greatly simplify the discovery process for the end-user, by either narrowing down the number of possible/IdPs to choose from or by making the actual selection process fully transparent.

doc

pdf

Status
colourYellow
titleFinal call

AARC-G038 AARC2-JRA1.4CBest practises for scalable account (de)provisioning of VO membersBest practises for scalable account provisioning, management, and deprovisioning, particularly from the perspective of the standard protocols used to manage accounts (such as LDAP, VOOT, SCIM, etc.)doc

Status
colourYellow
titleIn progress

AARC-I028

(was AARC2-JRA1.2B)

Best practices for integrating OpenID Connect / OAuth2 based end services

Capture what OIDC-based services need to understand, which schemes to follow in order to benefit from federated identities, that currently are exclusively in the SAML world.

This will probably include pointers to documents that specify mappings between SAML and OIDC expression of attributes, entitlements or claims.

OIDC/OAuth2 client registration is covered in AARC-G032

Wiki

doc

Status
colourYellow
titleIn progress

Upcoming / Inactive Drafts

Guidelines

...