...
Readers are required to edit lines Edit the file to change the URL pointing to the WiFiMon Analysis Station and change the designated number of the testtool. The name of the testtool is "NetTest-x". Please, change only character x by including the sequence number dedicated to your WiFiMon Hardware Probe. For example, if the WiFiMon Hardware Probe has been assigned number 1, enter "NetTest-131 and 38 according to their setup. In line 31, "WHP_NUMBER" should match the number assigned to the testtools of the particular WiFiMon Hardware Probe (WHP), e.g. for the WHP assigned the number 1, the value should be "1". Assigning numbers to WHPs is possible by appropriately setting the testtool attribute included in the websites monitored by them. More information related to assigning number to WHPs is available in the WiFiMon Test Server installation guide. In line 38, "WAS_FQDN" should match the FQDN of the WiFiMon Analysis Server (WAS) responsible for processing the wireless performance metrics of the WHP. The above code block assumes that the WAS uses the WiFiMon Secure Agent. In case of using the WiFiMon Non-Secure Agent, the URL of line 38 should be modified; instead of "https", the WiFiMon Non-Secure Agent requires "http" and the port on which the WAS listens is "9000" instead of "8443".
That's all! At this point you may (optionally) unplug the keyboard, the mouse and the monitor and let the WiFiMon HW Probe measure WHP measure the performance of your wireless network!