The main objective of [RARE / FreeRouter 101] series is to help you getting started with FreeRouter from scratch without any prior knowledge.

Overview

freeRouter is a free, open source router control plane software. For nostalgic and old networkers from prehistoric era (like me), freeRouter besides Ethernet, is able to handle HDLC, X25, frame-relay, ATM encapsulation. Since it handles packets itself at the socket layer, it is independent of underlying Operation System capabilities. We  We will see in the next articles how freeRouter subtlety leverage this inherently independence to connect different data-plane such as OpenFlow, P4 and other possible data-plane that would appear in the near future.

...

• no global routing table: every routed interface must be in a virtual routing table
• positive side effect: there are no vrf-awareness questions

Article objective

This article is meant to simply deploy 2 instances of freeRouter on the same fresh linux installed linux box. We are voluntary using freeRouter (freerouter.nop.hu) "raw" official repository in order to get familiar with the deployment manual process. Even if the deployment process is straightforward, it is not self explanatory for people non familiar with java/linux.

In order to simplify the deployment we have deployed a daily builtautomated freeRouter daily builds on:

• launchpad packages for ubuntu 18.04 and 20.04
• debian 10 (aka buster) package  on OpenSuse Build System
• container on Docker Hub

But let's get our "hand dirty" and follow the simple manual installation. 

Diagram

Image Removed

...

Image Added

[ #001 ] - Cookbook

...

apt-get update
apt-get upgrade

apt-get install default-jre-headless 

In this example, we won't recompile freeRouter so installing headless java In this example, we won't recompile freeRouter so installing headless java runtime is enough. This set up is recommended for production environment in order to ensure minimal software footprint

apt-get install default-jre-headless --no-install-recommends

...

╭─[12:58:45]floui@debian ~/freeRouter  
╰─➤  java -jar ./lib/rtr.jar 
java -jar ./lib/rtr.jar <parameters>
parameters:
  router <cfg>            - start router background
  routerc <cfg>           - start router with console
  routerw <cfg>           - start router with window
  routercw <cfg>          - start router with console and window
  routers <hwcfg> <swcfg> - start router from separate configs
  routera <swcfg>         - start router with sw config
  test <cmd>              - execute test command
  show <cmd>              - execute show command
  exec <cmd>              - execute exec command

╭─[12:59:11]floui@debian ~/freeRouter  
╰─➤  java -jar lib/rtr.jar routersc etc/r1-hw.txt etc/r1-sw.txt 
info cfg.cfgInit.doInit:cfgInit.java:556 booting
info cfg.cfgInit.doInit:cfgInit.java:680 initializing hardware
info cfg.cfgInit.doInit:cfgInit.java:687 applying defaults
info cfg.cfgInit.doInit:cfgInit.java:695 applying configuration
info cfg.cfgInit.doInit:cfgInit.java:721 done
welcome
line ready
r1#                   

╭─[12:58:52]floui@debian ~/freeRouter  
╰─➤  java -jar lib/rtr.jar routersc etc/r2-hw.txt etc/r2-sw.txt
info cfg.cfgInit.doInit:cfgInit.java:556 booting
info cfg.cfgInit.doInit:cfgInit.java:680 initializing hardware
info cfg.cfgInit.doInit:cfgInit.java:687 applying defaults
info cfg.cfgInit.doInit:cfgInit.java:695 applying configuration
info cfg.cfgInit.doInit:cfgInit.java:721 done
welcome
line ready
r2#                   

Verification

╭─[1:09:28]floui@debian ~  
╰─➤  telnet localhost 1123
Trying ::1...
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
welcome
line ready
r1#                   

╭─[1:15:37]floui@debian ~  
╰─➤  telnet localhost 2223                                                                                                                                           1 ↵
Trying ::1...
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
welcome
line ready
r2#                  

...

r1#sh run                                                                      
hostname r1
buggy
!
!
vrf definition v1
 exit
!
interface ethernet1
 description r1@e1 -> r2@e1
 vrf forwarding v1
 ipv4 address 1.1.1.1 255.255.255.252
 ipv6 address 1234::1 ffff:ffff:ffff:ffff::
 no shutdown
 no log-link-change
 exit
!
!
!
!
!
!
!
!
!
!                  
!
!
!
!
server telnet tel
 security protocol telnet
 no exec authorization
 no login authentication
 vrf v1
 exit
!
!
end

r1#                 

r2#sh run                                                                      
hostname r2
buggy
!
!
vrf definition v1
 exit
!
interface ethernet1
 description r2@e1 -> r1@e1
 vrf forwarding v1
 ipv4 address 1.1.1.2 255.255.255.252
 ipv6 address 1234::2 ffff:ffff:ffff:ffff::
 no shutdown
 no log-link-change
 exit
!
!
!
!
!
!
!
!
!
!                  
!
!
!
!
server telnet tel
 security protocol telnet
 no exec authorization
 no login authentication
 vrf v1
 exit
!
!
end

r2#                  

...

r1#ping 1.1.1.2 /vrf v1                                                        
pinging 1.1.1.2, src=null, cnt=5, len=64, tim=1000, ttl=255, tos=0, sweep=false
!!!!!
result=100%, recv/sent/lost=5/5/0, rtt min/avg/max/total=1/2/3/13
r1#
r1#ping 1234::2 /vrf v1                                                        
pinging 1234::2, src=null, cnt=5, len=64, tim=1000, ttl=255, tos=0, sweep=false
!!!!!
result=100%, recv/sent/lost=5/5/0, rtt min/avg/max/total=1/4/11/23
r1#                                                                                                      

r2#ping 1.1.1.1 /vrf v1                                                        
pinging 1.1.1.1, src=null, cnt=5, len=64, tim=1000, ttl=255, tos=0, sweep=false
!!!!!
result=100%, recv/sent/lost=5/5/0, rtt min/avg/max/total=0/1/2/12
r2#    
r2#ping 1234::1 /vrf v1                                                        
pinging 1234::1, src=null, cnt=5, len=64, tim=1000, ttl=255, tos=0, sweep=false
!!!!!
result=100%, recv/sent/lost=5/5/0, rtt min/avg/max/total=0/1/3/7
r2#                                                                     

r1#telnetr2#ping 1.1.1.12 23 /vrf v1                                                        
pinging 1.1.1.1, src=null, cnt=5, len=64, tim=1000, ttl=255, tos=0, sweep=false
!!!!!
result=100%, recv/sent/lost=5/5/0, rtt min/avg/max/total=0/1/2/12
r2#  
 - connecting to 1.1.1.2 23

welcome
line ready
r2#                                                                         

r1#telnet 1.1.1.2 23r2#telnet 1234::1 /vrf v1                                                      
 - connecting to 1.1.1.21234::1 23

welcome
line ready
r2#r1#                                                                      

Conclusion

In this article you:

• had a brief introduction of freeRouter networking swiiss-Swiss army knife
• learn how to deploy 2 instances of freeRouter and interconect interconnect them via 2 UNIX sockets on a VM guest running on VirtualBox on a VM guest running on VirtualBox 
• this setup is ideal, for network simulation encompassing hundreds of nodes, self contained in the same VM without interaction with the external world. (protocol experimentation, convergence test etc.)