...
This configuration is the most resilient setup, with service availability of 99.999%, and the capability to deliver capacity up to 100Gbps per port.
Figure 1: NREN is connected to GÉANT through the Juniper MX
...
This configuration is a highly resilient setup, with 99.99% service availability and delivered capacity up to 100Gbps per port.
Figure 2: Multi-Homed NRENs backup
...
This configuration can be as resilient as required but availability figures will depend on the exact setup and the selected provider. Capacity up to 100Gbps per port is available on GÉANT equipment.
Figure 3: Example of long-haul connectivity
Load Sharing
When an NREN connects to more than one PoP, it is possible to request for the load to be shared across the number of accesses available, as seen below in Figure 4.
Figure 4: Example of load sharing on multiple PoPs
...
When load sharing is enabled, the total volume of traffic across all the active accesses must remain within the NREN-subscribed 's primary IP capacity.
Routing Information
GÉANT maintains prefix lists on each NREN peering, to ensure integrity of the route announcement. Each of these lists are built on the RIPE object maintained by the NRENs to ensure the latest information is used. It is the NRENs responsibility to ensure the RIPE information are kept up to date.
...
Security
As an IP transit service, GÉANT IP provides security by monitoring the network for suspicious behavior and the GEANT CERT is the Computer Emergency Response Team (CERT) makes sure that an appropriate response is given to possible threats. The team will inform NRENs if any security incident affecting them is detected. NRENs are also able to subscribe to the Network Security Handling and Response Process (NSHaRP), without incurring any additional cost.
By subscribing to the NSHaRP service, the NRENs will be able to decide which events they want to be informed about and will start receiving automated emails informing about anomalies. More information on NSHaRP is available at:
http://www.geant.org/Networks/Network_Operations/Pages/NSHaRP.aspx
Demarcation Points
The management demarcation point between GÉANT and the NREN network is a port on the Optical Distribution Frame (ODF) rack, as described in Figure 8, below. The exact port will be specified at the time of the connection.
Figure 5: Illustration of the management demarcation point
The responsibility of the GÉANT Operations Centre (OC) ends at the declared demarcation point. Patching beyond this point is the responsibility of the ordering NREN.
Configuration Details
The following configuration details will be provided by GÉANT:
- IP addresses to be used in the GÉANT network and on the NREN access router.
...
- IP address space to be used for the access link.
...
- Authentication Server (AS) number of the GÉANT network.
...
- Domain Name Service (DNS) record, corresponding to GÉANT network address space.
...
- Message Digest Algorithm 5 (MD5) password for the BGP session (unless the NREN prefers not to use MD5).
...
- MSDP peer address (if multicast is being supported).
...
- Any other interface-specific configuration.
The NREN must specify:
- AS number of customer NREN.
- RIPE DB as-set (as-macro) to be accepted by GÉANT.
- MSDP peer address (if Multicast is being supported).
Service Description
Availability Target
The Service Level Target (SLT) for the GÉANT IP service is calculated from the GÉANT demarcation point and does not include any local tail that may be the NREN's responsibility. A service is considered unavailable when all access circuits are physically down at the same time.
The table below shows the three types of access available to connect to GÉANT, with their associated SLTs.
| Scope | Measurement | SLT |
|---|---|---|
| NRENs diverse connections to GÉANT routers | Service availability | 99.90% |
| Multi-homed NRENs connected to GÉANT with third-party managed circuits | Service availability | 99.90% |
| Single-homed NRENs | Service availability | 99.90% (may vary, depending on sub-providers) |
Time to Fix a Fault and Time to Respond Target
In order to meet these targets, the following timelines to respond to and fix a fault have been put in place.
| Scope | Measurement | SLT |
|---|---|---|
| ALL NRENs | Time to respond to a fault | 15 minutes |
| GÉANT PoPs in Europe | Time to fix a fault | 12 hours |
The GÉANT Operation Centre (OC) provides 24×7 support throughout the year. Notifications are issued to the affected partner within 15 minutes of incident detection by the central monitoring system.
GÉANT IP also offers access to GÉANT traffic monitoring tools to view traffic statistics that are either specific to the service, or for overall IP traffic on NREN access links. These are available on the Tool Portal: https://tools.geant.net/portal/
Any requirement for bespoke reporting mechanism for GÉANT IP traffic statistics and availability should be discussed with the GÉANT Partner Relations Team (partner-relations@geant.org).
Requesting additional GÉANT Access Capacity
To request an IP upgrade, please go to the GÉANT Partner Portal at: https://partner.geant.net/Pages/Home.aspx
Service Implementation and Delivery Time
Dark Fibre Upgrades
Requests for further physical capacity upgrades, which do not exceed the available physical capacity of the infrastructure, will be completed within ten working days from the upgrade request being accepted by the Partner Relations team.
For capacity upgrade requiring further physical capacity the upgrade will be completed within ten weeks from the solution being agreed.
Managed Wavelength Upgrades
In case of a connection being provided over a managed wavelength, the lead time will vary from provider to provider. Delivery times will be confirmed on a case-by-case basis. Please contact the Partner Relations team for more information: partner-relations@geant.org
| Service | Delivery time |
|---|---|
| GÉANT IP upgrade | 10 days |
| GÉANT IP upgrade requiring further physical capacity | 10 weeks |
Interface Options
Subscriptions of 40Gbps or below will be delivered on N x 10Gbps interfaces and subscriptions of 50Gbps and over will be delivered over a 100Gbps interface.
A total capacity upgrade of 40Gbps is offered over multiple 10Gbps interfaces by default, with the option of a 100Gbps interface instead of extra cost.
The table below details what interfaces are included in subscription upgrades. Port prices for the upgrade options can be found in the service price list at: https://partner.geant.net/Service_Catalogue/Pages/overview.aspx
| Current Bandwidth (GPs) | Upgraded BandwidthUpu | Default upgrade option No additional cost to the upgraded subscription | Alternative upgrade option Additional cost to the upgraded subscription |
|---|---|---|---|
| 10 | Up to and including 50G | Up to 4 additional 10G ports | 1 x 100G |
| 20 | Up to and including 50G | Up to 4 additional 10G ports | 1 x 100G |
| 30 | Up to and including 50G | Up to 4 additional 10G ports | 1 x 100G |
| 40 | Up to and including 50G | 1 additional 10G ports | 1 x 100G |
| 50 | Up to and including 100G | 1 x 100G ports | n/a |
| 60 | Up to and including 100G | 1 x 100G ports | n/a |
| 70 | Up to and including 100G | 1 x 100G ports | n/a |
| 80 | Up to and including 100G | 1 x 100G ports | n/a |
| 90 | Up to and including 100G |
Pricing
The GÉANT IP access is inclusive of all the required interfaces on the IP equipment (unless a non-standard delivery option is required). An annual cost for the service is calculated annually by the GÉANT Cost Sharing Model. For the current version of the Cost Sharing Model, please see the Partner Portal https://partner.geant.net.
The GÉANT IP Service provides NREN access to the GÉANT IP Service, as well as to other GÉANT services, such as GÉANT Plus and GÉANT L3VPN. See https://partner.geant.net/Pages/Home.aspx for more information on those services.
Charges may apply to backhaul a backup circuit to a neighbouring PoP to increase the resilience.
A one-off charge applies for the backhaul of a backup circuit.
- 10G: €7500
- 100G: €104 000
- An additional €1000 per interface installation fee
Please note that all prices are quoted before the European Commission rebate.
For more information or questions, please email partner-relations@geant.org.