You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

If you have reached this point it is because you are interested in using our testbed to develop your own P4 applications and therefore this section is where you are supposed to be.

First of all, you need to request access to the testbed through rare@lists.geant.org explaining what are you willing to use the testbed for. After committee aproval, you will be granted the access to the testbed.

Assuming you already have the permission to use the testbed, the following instructions are intended to make you understand how the testbed is used, what can you expect from it and what do we expect you to do (and not to do).

Access the NMaaS Domain

In order to provide access to the testbed and provide also with some services that are needed to support it, the NMaaS provides among others with VPN access, a reservation service based on schedule and a bastion from which the resources are accessible.

VPN Access

So once you are granted administratively access to the testbed, a vpn configuration file is provided to you. The vpn is based on openvpn and any Operating service can be used to connect to it. In particular if you are working from a linux system you can use the following command to connect to it and you should get some output similar to the one you can see below


$ sudo openvpn --verb 3 --config user.ovpn            
[sudo] password for user: 
Mon Jun  1 15:38:44 2020 OpenVPN 2.4.9 [git:makepkg/9b0dafca6c50b8bb+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Apr 20 2020
Mon Jun  1 15:38:44 2020 library versions: OpenSSL 1.1.1g  21 Apr 2020, LZO 2.10
Mon Jun  1 15:38:44 2020 Outgoing Control Channel Authentication: Using 256 bit message hash 'SHA256' for HMAC authentication
Mon Jun  1 15:38:44 2020 Incoming Control Channel Authentication: Using 256 bit message hash 'SHA256' for HMAC authentication
Mon Jun  1 15:38:44 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]150.254.160.131:1194
Mon Jun  1 15:38:44 2020 Socket Buffers: R=[212992->212992] S=[212992->212992]
Mon Jun  1 15:38:44 2020 UDP link local (bound): [AF_INET][undef]:1194
Mon Jun  1 15:38:44 2020 UDP link remote: [AF_INET]150.254.160.131:1194
Mon Jun  1 15:38:44 2020 TLS: Initial packet from [AF_INET]150.254.160.131:1194, sid=b5d0dcc3 12d2a696
Mon Jun  1 15:38:44 2020 VERIFY OK: depth=1, CN=sts-ca, C=PL, ST=Poznan, L=Poznan, O=PSNC, OU=PLLAB
Mon Jun  1 15:38:44 2020 VERIFY KU OK
Mon Jun  1 15:38:44 2020 Validating certificate extended key usage
Mon Jun  1 15:38:44 2020 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
Mon Jun  1 15:38:44 2020 VERIFY EKU OK
Mon Jun  1 15:38:44 2020 VERIFY X509NAME OK: CN=sts-vpn.nmaas.eu, C=PL, ST=Poznan, L=Poznan, O=PSNC, OU=PLLAB
Mon Jun  1 15:38:44 2020 VERIFY OK: depth=0, CN=sts-vpn.nmaas.eu, C=PL, ST=Poznan, L=Poznan, O=PSNC, OU=PLLAB
Mon Jun  1 15:38:44 2020 Control Channel: TLSv1.2, cipher TLSv1.2 ECDHE-RSA-AES256-GCM-SHA384, 4096 bit RSA
Mon Jun  1 15:38:44 2020 [sts-vpn.nmaas.eu] Peer Connection Initiated with [AF_INET]150.254.160.131:1194
Mon Jun  1 15:38:45 2020 SENT CONTROL [sts-vpn.nmaas.eu]: 'PUSH_REQUEST' (status=1)
Mon Jun  1 15:38:45 2020 PUSH: Received control message: 'PUSH_REPLY,route-gateway 192.168.99.1,topology subnet,ping 10,ping-restart 60,route 192.168.113.0 255.255.255.0 192.168.99.1,ifconfig 192.168.99.22 255.255.255.0,peer-id 9,cipher AES-128-GCM'
Mon Jun  1 15:38:45 2020 OPTIONS IMPORT: timers and/or timeouts modified
Mon Jun  1 15:38:45 2020 OPTIONS IMPORT: --ifconfig/up options modified
Mon Jun  1 15:38:45 2020 OPTIONS IMPORT: route options modified
Mon Jun  1 15:38:45 2020 OPTIONS IMPORT: route-related options modified
Mon Jun  1 15:38:45 2020 OPTIONS IMPORT: peer-id set
Mon Jun  1 15:38:45 2020 OPTIONS IMPORT: adjusting link_mtu to 1625
Mon Jun  1 15:38:45 2020 OPTIONS IMPORT: data channel crypto options modified
Mon Jun  1 15:38:45 2020 Data Channel: using negotiated cipher 'AES-128-GCM'
Mon Jun  1 15:38:45 2020 Outgoing Data Channel: Cipher 'AES-128-GCM' initialized with 128 bit key
Mon Jun  1 15:38:45 2020 Incoming Data Channel: Cipher 'AES-128-GCM' initialized with 128 bit key
Mon Jun  1 15:38:45 2020 ROUTE_GATEWAY 192.168.18.1/255.255.255.0 IFACE=wlan0 HWADDR=64:80:99:97:d6:d2
Mon Jun  1 15:38:45 2020 TUN/TAP device tun0 opened
Mon Jun  1 15:38:45 2020 TUN/TAP TX queue length set to 100
Mon Jun  1 15:38:45 2020 /usr/bin/ip link set dev tun0 up mtu 1500
Mon Jun  1 15:38:45 2020 /usr/bin/ip addr add dev tun0 192.168.99.22/24 broadcast 192.168.99.255
Mon Jun  1 15:38:46 2020 /usr/bin/ip route add 192.168.113.0/24 via 192.168.99.1
Mon Jun  1 15:38:46 2020 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Mon Jun  1 15:38:46 2020 Initialization Sequence Completed



At this point you shall be able to reach the services provided by the NMaaS , in particular, our booking service at https://p4-bkd-srv.rare.nmaas.eu

Providing your public SSH Key

Access to the bastion and also to the devices capable of building and running p4 programs is available through ssh connectivity employing asymmetric keys.

Generating your keys

If you ever used ssh keys for ssh access. You can easily generate a pair via ssh-keygen command, other clients like putty (Windows) also provide ways to generate key pairs (https://www.ssh.com/ssh/putty/windows/puttygen)

$ ssh-keygen 
Generating public/private rsa key pair.
Enter file in which to save the key (/home/user/.ssh/id_rsa): /home/user/.ssh/testbed_user_key      
Enter passphrase (empty for no passphrase): 
Enter same passphrase again: 
Your identification has been saved in /home/user/.ssh/testbed_user_key
Your public key has been saved in /home/user/.ssh/testbed_user_key.pub
The key fingerprint is:
SHA256:sZQEzn20FTRxyOiKm1x2dHALHncIdhW3+uHsm756koI user@myhost
The key's randomart image is:
+---[RSA 3072]----+
|      ... +=B*+..|
|     o o +=+*o...|
|      o =oo* o . |
|       . ++ o .  |
|       .So . . . |
|      . + .   + .|
|     . = ..   .+ |
|      +  E . o...|
|            ..=*o|
+----[SHA256]-----+


The process will generate two files. One is your private key that identifies you unequivocally and the .pub file that holds the public key allowing anyone (and in particular the testbed) to know that it is you and only you accessing it.

So you need to provide us the public key sending it via email to jordi.ortiz@um.es

In case you used putty  there is the option to export your key as openssh format, if possible that's the format desired.

Scheduling system

The testbed will enforce user access thanks to the automation of ssh public key installation into the bastion and the switches. The reservations will be checked everyday at 00:00 am so will not be possible to make a reservation for recent day but is possible to make a reservation in a multiple day timespan. The reservation system is based on booked and is accessible here: https://p4-bkd-srv.rare.nmaas.eu Your credentials will be provided to you alongside with the openvpn configuration.

After logging in, the following screen where the resources available are presented and links to reservation page are shown.

  • No labels