This is a working document, minor changes can be expected at any time.


This document describes operational procedures implemented to support eduGAIN SAML services. It is required by the eduGAIN SAML Profile document [eduGAIN-Profile] and in addition to the Metadata Aggregation Practice Statement must be seen as complementary to eduGAIN SAML Profile.

eduGAIN services

Under the term services listed are utilities as perceived by external users. The internal organisation of services, flow of information and dependencies are not relevant in this view, but are described in sections further down.

Core Services

NameAccess locationDescriptionManaged by
MDShttps://mds.edugain.orgeduGAIN Metadata Distribution Service (MDS) is the central component of the eduGAIN service as a whole. For the  detailed description and procedures used in the eduGAIN metadata aggregate distributed by MDS see [eduGAIN-meta]. The eduGAIN metadata aggregate is produced on a separate, secured host (mds-feed) and it is copied to the distribution hosts and served from there by the http server. The file is updated hourly.OT
The technical sitehttps://technical.edugain.orgThe technical site is directed primarily at the federation level technical personel. It provides information about eduGAIN members, details about their participation. The technical site is also the distribution point of documentation and the home for several core and supplementary services.OT
Validatorhttps://validator.edugain.orgThe eduGAIN validator is a service designed for validating metadata adherence to standards and eduGAIN requirements. The software has been created primarily as a component for the eduGAIN metadata aggregation and the details of validation rules are given in [eduGAIN-meta]. The same software enriched by a GUI is used as a tool for manual validation of metadata and serves as a support tool for federation operators.OT
eduGAIN status information status page provides a view of the eduGAIN database in the part relevant to membership information and the current status of metadata aggregation. The page also displays short summary information about numbers of entities in eduGAIN. The interface provides links to scans of the eduGAIN declaration documents signed by federations, direct links to metadata validation, links to contacts, metadata sources etc.OT
Entities database GUI service is an interface to the part of the eduGAIN database which stores information about entities themselves. The interface has many filtering mechanisms and also allows for CSV download for further processing in a spreadsheet.OT
eduGAIN database API API provides access to most of information stored in the database. In particular, the API may be used by the federations to monitor the eduGAIN aggregation process. Other uses are statistics of various sorts or even download of membership maps.OT

Supplementary services

NameAccess locationDescriptionManaged by
ECCS Connectivity Check Service is a monitoring service for IdPs listed in eduGAIN, testing if they are actually ready for eduGAIN, i.e. if they consume eduGAIN metadataOT
isFederated Check tool searches all known academic identity federations for matching organisations and then displays the results.OT
CoCo monitor service testing for REFEDS Code of Conduct complianceSRCE
Technical testing platformhttp://technical-test.edugain.orgThis host serves as a playground for software development done by the operational team. All extensions are applied, tested and presented at this platform and then transferred to production using the git mechanismOT
The WIKI is maintained as a part of the GEANT WIKI space. The content is provided by many members of the community. WIKI serves as technical documentation, formal documentation (meeting minutes, documentation of operational procedures) and various guides on joining and making most of eduGAINGEANT core

Operational Team tasks

The team

As defined in [eduGAIN-CONST] the Operational Team (OT) is responsible for:

At the moment the OT also acts as the operator of the SAML technology profile.

Management of core eduGAIN services

Management or supervision of supplementary eduGAIN services

Supervision of eduGAIN joining process

The joining process support has been assigned to the Operational Team, but decision making and organising the voting process currently lies within the eduGAIN SG and its chair. The OT handles all technical details of joining, like metadata validation, signing certificate handling etc. Any paperwork is handled by the eduGAIN secretariat provided by GEANT.

eduGAIN operational model and availability of services

eduGAIN core function is the metadata exchange point. Federations supply their own metadata and download aggregated metadata to supplement their own and redistribute them within their federation members. Federations are strongly discouraged from pointing any of their members directly to the eduGAIN MDS. The operational baseline of MDS availibility is set at 99% for any given month. The unavailability details are provided at eduGAIN Services Status and system changes are listed at

While every care is taken that all eduGAIN services function reliably, the selected operational model allows that services updates and modifications can be done at a short-term notice allowing for a small risk of a downtime required to restore the system snapshot.

Operational Team procedures

Registration and modification of SAML profile related federation information

information typesecurity level
federation SAML policy URL1

registration practice statement URL


federation SAML metadata aggregate access URL


federation metadata signing key

registrationAuthority attribute value3

Security levels
security leveldescription
Sspecial - delegating representatives requires contact with the federation management
1informational, not requiring special vetting
2important contact information (while not currently used it may be introduced in the future)
3information of eduGAIN operational relevance, requires special care
4crucial for eduGAIN trust, requires utmost care

Introduction of new requirements for federation metadata feeds

Metadata requirements have direct operational impact. As described in the  [eduGAIN-meta] document, a violation of the requirements results in rejection of a federation feed. The requirements as understood in this documents are the rejection rules implemented in the eduGAIN metadata validator and automatically applied in the aggregation process.

As a principle requirements for federation feeds must be based on either general standards to which eduGAIN SAML profile adheres or on the eduGAIN SAML profile. In the case of standards, the experience shows that certain violations are only discovered when reported by participating federations - not all such violations are reported by standard schema validation tools, and in fact not all are just schema errors. Whenever a new problem is reported, the OT makes an assessment whether it in fact violates a required standard and if so then:

Every rule is documented in the [eduGAIN-meta] .

When raising an error, the validator points to the specific rule in  [eduGAIN-meta].

Arising problems which cause actual interoperability issues need to be handled immediately, as described in the matadata aggregation related procedures section below.

Introduction of new best current practices for federation metadata feeds

Additions to metadata best current practices need to be decided by the eduGAIN SG. Each such good practice  needs to be implemented as an eduGAIN validator warning by the eduGAIN OT. Each good practice rule needs to be added to [eduGAIN-BCP].

Metadata aggregation related procedures

The technical details of the aggregation process are described in  [eduGAIN-meta]. Here we only present the operational implementation of this process.

Aggregation, signing and publishing

The aggregation, signing and publishing of the eduGAIN metadata aggregate is done on an hourly basis.

All information about the system status, federation metadata channel information, federation public keys etc. is kept in the eduGAIN database and taken from there as required within the aggregation process.

Handling of aggregation alerts

As described in [eduGAIN-meta], under certain conditions aggregation alerts are raised. The current practice is that these alerts are sent as e-mails to the eduGAIN OT and to the contact address of the Federation that is affected. There is one exception to that rule - metadata unavailability alerts are sent to the OT only to avoid possible false positives caused by temporary network problems. The OT then makes its own decision when to contact the Federation.

It must be realised that that the case of all entities supplied by a large federation being deleted from eduGAIN has heavy consequences - other participating federations will naturally have to drop these entities. When the federation metadata feed becomes available again, other federations may be forced into running emergency regeneration of their metadata, service providers may observe limited breaks in their service. Therefore the eduGAIN OT is making all possible effort to avoid such situations. If the eduGAIN OT realises a very special situation it is allowed to temporarily stop aggregation in order to avoid the deletion of of the federation but it MUST immediately notify the eduGAIN SG that such measures have been taken.

One example of such a special situation may be a real case of an introduction of a valid but a very short-lived metadata file followed by a metadata error causing a aggregation reject. That situation, leaving no time for normal procedures to take place, was caused by a configuration error on the federation side and was rectified in a short time while the eduGAIN aggregation was suspended.

System maintenance

System updates


Disaster recovery

In the case of an unexpected problem resulting from metadtata aggregation (which may result from an unusual error on a federation side or some software bug in one of the aggregation process steps) the eduGAIN OT has access to hourly copies reaching 24 hours back and to several years of daily copies .

Restoration of snapshots or full virtual machines is possible (and has been performed several times not as disaster recovery but in order to get access to some old files for statistics reasons).

Technical details

eduGAIN database description

The eduGAIN database is central to all eduGAIN core services. The database stores:

The database is placed on a host separated from the external network, accessible only trough a limited numbers of secure hosts. Database access is realised via dedicated user accounts with access right crafted to minimize the possibility of unauthorized changes.

The database is managed mostly via a web interface secured with access passwords. Modification of data on security levels S, 1, 2 can be done without any additional protection. Management of data with security level 3 is protected with on-time passwords mailed to an external mail account of the managing administrator. Management of data with security level 4 requires direct access to the database host. 

For security reasons singing keys can be present only for federations which have been approved to be a member of the eduGAIN SAML Profile.

eduGAIN Metadata Distribution Service (MDS) 

eduGAIN Metadata Distribution Service (MDS) is the central component of the eduGAIN service as a whole. For the  detailed description and procedures used in the eduGAIN metadata aggregate distributed by MDS see [eduGAIN-meta] and the Aggregation, signing and publishing subsection within this document. The eduGAIN metadata aggregate is produced on a separate, secured host (mds-feed). Metadata signing is also peformed on mfs-feed currently with a key file located on the host istself.

In order to minimise risks of exposing a high permissions account on the mds host the resulting aggreagate file is transferred from mds-feed to the mds host using a dedicated low permissions account. The aggregate is then moved to the final place on the mds host in a process initiated within the mds host.

Organisation and management of services

Main access host - technical, validator, mds
DNS names,;;

All these are CNAMEs for


eduGAIN database - edugain-db

Functionstore all data for services directly managed by the eduGAIN OT
The aggregation host - mds-feed
Functionacquire and validate federation metadata feeds, create, sign and publish the  eduGAIN metadata aggregate.

Security considerations

The security of the eduGAIN SAML services is essentially the security of the eduGAIN aggregate. This in turn depends on:

  1. validation of federation metadata input data - their originality and integrity - this depends on the safety of federation certificates (stored in the database) and the safety of the signature verification process itself
  2. aggregation process - it is crucial that the resulting aggregate contains exactly the data provided by participating federations (after modifications described in the [eduGAIN-meta])
  3. aggregation signature - the eduGAIN signing key and the signing process are the key factors here.

In order to maintain the high security standards the following operational procedures are in place, 

  1. The edugain-db and mds-feed hosts are located in a secured private network and can be accessed only from a single host in the PSNC network.
  2. The access to this single host is only available over SSH and only from a limited list of IP addresses.
  3. The federation signing keys can only be stored in the edugain-db with a process that needs to be run directly on the db host. This requires that the OT copy the key to the database host and run the process manually. The key is added to the database only when the decision to actually admint the federation metadata to eduGAIN has been taken. This is an additional security procedure guarding against a mistake in assigning the level of participation for a federation.
  4. The eduGAIN signing key is stored on the mds-feed host, where the whole process of aggregation and signing is run hourly. This host cannot be reached from the external network. The resulting signed aggregate is then moved to the distribution host as described in the Metadata aggregation related procedures section.



[eduGAIN-BCP] Best Current Practice

[eduGAIN-meta] Metadata Aggregation Practice Statement