eduroam Managed SP uses the same institution management workflows that eduroam CAT and eduroam Managed IdP use, see A guide to eduroam CAT 2.0 and eduroam Managed IdP for National Roaming Operator administrators.
After logging in to https://msp-pilot.eduroam.org remember to go to your NRO details and enable the eduroam Managed SP (still labelled IdP) function:
You can now invite organisations inside your NRO to the new eduroam Managed SP service. In the usual invitation form, observe the new selection box which allows you to configure the type of participation: Service Provider:
This is all you have to do. The organisation's administrator will now get the sign-up token by email and can start using eduroam Managed SP. For reference, the invitation mail looks like this (click to enlarge):
You have received an invitation mail from your eduroam National Roaming Operator. Please follow the link in the invitation and log into the system with a federated or social identity of your choice. Afterwards, you will be presented with a screen allowing you to set basic parameters about your organisation (such as name, logo, approximate geographic location). Most of these fields are optional. The only required field is to set a Helpdesk Contact email address. Without a configured helpdesk address, you will not be able to to continue setting up your eduroam Managed SP!
At the end of this sign-up wizard, you are presented with your organisation overview in the system. This screen allows you to proceed to the eduroam Managed SP configuration details ("Manage SP functions"):
The button on the lower end will enlist you for eduroam Managed SP. You are immediately assigned two RADIUS servers to use (a primary = geographically closest to you, and a backup = runner-up to the closest). The configuration is not yet active on our servers:
You can either activate the configuration immediately (this is probably the best option for all inexperienced administrators) or can choose to tweak some advanced configuration details first:
The three available options mean the following:
Once you have activated your deployment with the green "Activate" button above, you are ready! In your local Wi-Fi equipment, find the WPA-Enterprise (RADIUS) configuration options. There, you enter any of the RADIUS IP addresses, the matching RADIUS port number, and the RADIUS shared secret, as indicated. The rest of the Wi-Fi configuration is standard eduroam, like SSID=eduroam, WPA2/AES. And then, go ahead and try it out - eduroam users are now able to use your Wi-Fi network.
Remember that the IP/port/secret details are only valid for your own deployment, and are meant to be kept private. Anyone with access to that data can pretend to be your Wi-Fi hotspot!