Page History

[service]
# Just suggested format of network name, eg: DOMAIN = "LOC.nsi.geant.net" and LOC = "mx1.ams.nl" or "ams" as per previous convention
# NOTE: When configuring aggregator, the domain should look like the following: DOMAIN = "nsi.geant.net".
network=DOMAIN
user=opennsa
logfile=/home/opennsa/logs/opennsa-LOC.log

## Host can often be detected.
## Default port is 9080/9443 depending on tls

host=OPENNSA_HOST_IP
port=9444 # Good practise is to use 9443 for main/aggregator process 

database=opennsa-LOC
dbuser=opennsa
dbpassword=
tls=false

# Location of topology description file
# NOTE: When configuring aggregator, NO NRM FILE should be configured. Just comment out/delete the nrmmap line.  
nrmmap=/home/opennsa/topology/opennsa-LOC-top.nrm

# Peering: with domainaggregate feature uPAs should not have any peers defined!
# peers=http://ANY_OPENNSA_HOST_IP_OF_PEER:PORT_OF_PEER/NSI/discovery.xml
#        http://ANY_OPENNSA_HOST_IP_OF_PEER:PORT_OF_PEER/NSI/discovery.xml


# Backend configuration here is for the gts Junos MX platform with ssh channel against router ...
# Always uncomment/use just one backend at the time. More description can be found on OpenNSA wiki.
# NOTE: When configuring aggregator, NO BACKEND should be configured. Just comment out/delete the backend section. 

# use this dummy backend without any further configs. Useful for testing.   
#[dud]  

# JunosMX is the backend for Juniper MX platform supporting VLAN,MPLS and port based STPs. 
[junosmx]
host=MANAGEMET_IP
user=opennsa
fingerprint=XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX
publickey=/home/opennsa/.ssh/opennsa_rsa.key.pub
privatekey=/home/opennsa/.ssh/opennsa_rsa.key
# LOOPBACK_IP for beeing used as LSP target from different PE routers
# All routers in dataplane needs to be listed here.
routers=ROUTER_LOC1:LOOPBACK_IP # LOOPBACK_IP for beeing used as LSP target from different PE routers
  ROUTER_LOC2:LOOPBACK_IP        

#JunosEX is the backend for Juniper EX 4550 platform supporting VLAN based STPs only. 
#It supports label swapping using CCC feature.  
[junosex]
host=MANAGEMET_IP
user=opennsa
fingerprint=XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX
publickey=/home/opennsa/.ssh/opennsa_rsa.key.pub
privatekey=/home/opennsa/.ssh/opennsa_rsa.key

#Section for JUNOS SPACE backend configuration. Uncomment just one backend config for the configured instance
[junosspace]
space_user=USERNAME
space_password=PASSWORD
space_api_url=https://IPADDR/api/space
configlet_activate_local=CONFIGLET_ID_IN_JUNOSSPACE
configlet_activate_remote=CONFIGLET_ID_IN_JUNOSSPACE
configlet_deactivate_local=CONFIGLET_ID_IN_JUNOSSPACE
configlet_deactivate_remote=CONFIGLET_ID_IN_JUNOSSPACE
# LOOPBACK_IP for beeing used as LSP target from different PE routers
# All routers in dataplane needs to be listed here.
routers=gtstest2:589838:IPADDR2 # FORMAT OF THE 3 tuple: network_name:router_id_in_junosspace:loopback_ip
 gtstest1:589834:IPADDR1