Completed activities
Ongoing activities
Pending ideas
TIM students
Active members
Iterations
The GN4-3 WP5 T2 Trust and Identity Incubator (“T&I Incubator”) aims to develop, foster and mature new ideas in the Trust and Identity space in Research and Education. The incubator will investigate new technologies that currently have no place (yet) in the services ecosystem of the GÉANT project. This may include to test and experiment with potential new features for existing GÉANT services. In addition also business case development for potential new services and developments that would improve data protection and privacy aspects in services or software are in scope.
The T&I incubator runs four to eight incubator activities per project year in parallel. These incubators typically take about 6 months and employ an agile methodology to enable rapid development of ideas. Preferably at least two subject matter experts work together with support from the project team. Subject matter experts are recruited from within the team or, preferred, sponsored by their NRENs. In addition, the project team facilitates the incubator track by providing a scrum master and dedicated developers.
Main Incubator Board (MIB) aims to represent a broad view on Trust and Identity related developments in R&E. MIB members are senior subject matter experts from the European NREN trust and identity community. They evaluate new ideas and provide advice to the work package lead. They are also responsible for reviewing activities at the end of each incubator cycle and providing recommendations on how to proceed. The incubator team presents their results regularly to the the MIB's and the wider community. In the middle and at the end of a cycle there are two events public events, so called sprint demos.
The service task operates and maintains the T&I services in the GÉANT project (WP5 T1). The incubator works closely with the responsible service owner on activities that have an impact on an existing service. They are already involved in the selection of new activities to ensure that the topic is appropriately supported. Once the activity is completed, all results are handed over to the service owner, who will take care of further development.
Some of the Incubator's outputs are not handed over to a specific party, but are made available to the wider community. These are, for example, the results of studies and research that are published or software that is publicly released as open source. All results are publicly available and announced via the project's news channels to inform as many community members as possible.
In addition to the general R&E community, the Incubator sometimes works with external partners. These can be other communities, projects or groups that develop software products or provide services. Examples are institutions, individual NRENS or groups such as the Shibboleth Consortium.
The Incubator accepts proposals from the entire R&E community as long as they are suitable to improve the T&I space. All kinds of innovative ideas are welcome, regardless of whether they are about new products, improving existing services or even completely disruptive. The format for submitting a proposal is designed to be as simple as possible. There is a "Call for Ideas" page in the GÉANT wiki where anyone can share their ideas. All you have to do is create a new row in the table and describe your own idea. Other community members can comment and support it. The more popular an idea is, the more likely it is to be implemented in the Incubator. New ideas can be submitted at any time, but there is a deadline before each cycle so that they can be considered for the next cycle.
Call for IdeasActivities
![photo](https://wiki.geant.org/download/attachments/148090083/community-tagging.jpg)
Community Tagging
Research communities have a need to express and potentially share certain trust marks on IdPs and SPs. These trust marks may differ from existing trust marks issued by identity federations. This is why this activity implemented a proof of concept based on a given set of community requirements and investigated in potential scenarios and impacts.
Activity page-
Results & Deliverables
The following results were created and delivered:
- Community Tagging GAP analysis
- Proof of concept using Access Check Tool in conjunction with Jagger
- Video: create a federation and new entity catergory
- Video: Access Check
- Video: Jagger after Access Check
-
Ownership & Utilisation
The work has been concluded. Documentation on the prototype is publicly available and the results were provided to the SIRTFI community to further pursue this POC.
![photo](https://wiki.geant.org/download/attachments/148090083/community-trust.png)
Community-Based Trust
This activity examined how identity vetting and token registration can be scaled for second-factor authentication scenarios where participants are distributed over EU and beyond. As part of this activity a specific flow - based on a community-based approach - was investigated. It takes into account the concept of the Web of Trust. While this mechanism typically does not work well in broad user groups, it is very well suited to distribute trust between small groups where a pre-existing trust fabric is already in place, as we typically have in research communities. What was missing is a means to make this trust network auditable and transparent. In order to make the trust network transparent, this activity identified and developed tools to support this flow.
Activity page-
Results & Deliverables
The following results were created and delivered:
-
Ownership & Utilisation
The outcome is intended to be used in the scope of research communities. In collaboration with the eduTEAMS task the results can be used to provision and improve the Stepup solution of the GÉANT service.
![photo](https://wiki.geant.org/download/attachments/148090083/cryptech.png)
Cryptech HSM
In many of the T&I services in the R&E sector, there is a need to securely store sensitive data like key material. Currently, this is rarely done using Hardware Security Modules (HSM) as they are associated with high costs. The goal of this activity was to evaluate the capability and applicability of affordable devices from the Cryptech project for use cases within the GÉANT project and to set up devices for testing purposes.
Activity page-
Results & Deliverables
The following results were created and delivered:
- Evaluated usage of Diamond Key appliances and capabilities
- Detailed community use-cases for HSM
-
Ownership & Utilisation
The work could not be concluded as Diamondkey seased operations during the evaluation period.
![photo](https://wiki.geant.org/download/attachments/148090083/discovery-service.jpg)
Discovery Pilot
Discovery is used in Federated Identity Management to locate the users home organization. This activity evaluated the pilot discovery service ran in the previous GÉANT project and investigated if/how the implementation technology Seamless Access developed within the RA1 project can be used for an implementation in eduGAIN.
Activity page-
Results & Deliverables
The following results were created and delivered:
- DSX Discovery Service Feedback Report
- Preparation of handover to eduGAIN service activity
-
Ownership & Utilisation
The work has been concluded in the Incubator and was handed over to the eduGAIN service task for the purpose of making a production service.
![photo](https://wiki.geant.org/download/attachments/148090083/distributed-identity.png)
Distributed Identity for researchers
A new paradigm, Distributed Identity, tries to let user be in direct control of the profile information they share with services. Rather then letting others provide claims towards a service, the users collects claim themselves from various sources and independently provides these when so requested by services. The services can check the validity of these claims against a central verifiable claims registry. This activity investigates the functional requirements for such a system by interviewing key stakeholders.
Activity page-
Results & Deliverables
This activity is work in progress at the time of writing.
-
Ownership & Utilisation
This activity is work in progress at the time of writing.
![photo](https://wiki.geant.org/download/attachments/148090083/sfa.jpg)
SFA - Distributed Vetting
Several research communities, especially in the life sciences domain, have a need to use second factor authentication to improve the quality of their authentication. One of the challenges identified was how to securely vet the second factor tokens of the participants of a collaboration in a case where the members of the collaboration are very distributed, as is the case in most pan-EU research collaborations. This activity investigated, together with research communities, how the token registration can be scaled for scenarios where participants are distributed over the EU and beyond. The aim of this task was to identify ways this vetting can be done.
Activity page-
Results & Deliverables
The following results were created and delivered:
-
Ownership & Utilisation
A final report was delivered. The activity will continue for another Incubator cycle.
![photo](https://wiki.geant.org/download/attachments/148090083/edulnk.jpg)
eduLNK
eduLNK aims to provide software and potentially a servcie for a secure, persistent and privacy preserving link shortener for research and education. Link shorteners reduce a lengthy URL on the internet to something short and snappy, and sometimes easy to remember. As such it is a very well used and liked functionality within our community. Many ‘free’ link shorteners exist, however, their free nature comes with a number of challenges, including serving advertisements and data mining the users behaviour and interests. Next to privacy concerns, many free link shorteners have a limited lifetime for the links they present. eduLNK aspires to deliver a product from and for the community which can be trusted and used securely in a privacy preserving way.
Activity page-
Results & Deliverables
The following results were created and delivered:
- eduLNK source code
- eduLNK prototype
- Onboarding documentation
- New Idea Form
- Final presentation
-
Ownership & Utilisation
A prototype of the eduLNK software was created and a public test instance was made available. With the submission of the official new idea form, eduLNK may become a potential new service in the GÉANT project.
![photo](https://wiki.geant.org/download/attachments/148090083/feudal.png)
Instant User Provisioning
Some systems, like non-web services, cannot be federated easily because they need user accounts to be provisioned before they can login. A prototype of an instant deployment tool called FEUDAL was developed by KIT. It facilitates provisioning of user accounts using virtual organisations (VO). Feudal is based on OIDC: It is an OIDC client, and it simply transports the information of the /userinfo endpoint along. Feudal is based on the concept of VOs (or authorisation Groups), i.e. the end services provide the information which VOs it supports. Feudal web fronted will only display services for provisioning to a given user based on his VO membership.
Activity page-
Results & Deliverables
The following results were created and delivered:
-
Ownership & Utilisation
The aim of this project was to create an easy to use, adoptable software solution to provision server users and provide this tool to the community. The solution is ready to be picked up and further developed and used by KIT. They plan to use this software in two "Helmholtz" projects HDF and HIFIS in Germany for the foreseeable future. Besides this, the solution was adjusted to the needs of eduTEAMS. The solution was provided to the eduTEAMS service task to be integrated into the GÉANT service.
![photo](https://wiki.geant.org/download/attachments/148090083/identity-validation.jpg)
Identity Validation Broker
Both research communities as well as institutions have a need for proper proof of the identity of their users. This ranges from cases where e.g. new students living abroad need to be identified as part of the boarding into an institution, to scenarios where access to (medical) data puts regulatory demands on the research community. Identity proofing is however expensive and scales very poorly, especially in cases where the users are (very) distributed. This activity investigates, based on requirements collected from multiple stakeholders, if and in which way this situation may be improved.
Activity page-
Results & Deliverables
The following results were created and delivered:
-
Ownership & Utilisation
Our findings indicated a strong desire for information about the capabilities of the various document-based identity verification solutions, which would help in defining what the requirements and suitable deployment model for an R&E focused solution could be. In particular we concluded that further work would be needed to reach a definitive conclusion and recommended: Establishment of a platform for information capture and exchange on document-based identity verification solutions Comparative analysis of available commercial solutions should be performed and made available Surveying of the broader R&E community based on the findings so far to see the level of interest and support more generally Constructing a preliminary business case for a community-operated service following the broader survey It is hoped that an interested party or parties can take this work forward, as further work on this topic is currently outside the scope of the Incubator.
![photo](https://wiki.geant.org/download/attachments/148090083/idpaas.jpg)
IdP as a Service
The former GN4-2 project developed a solution to offer an IdP as a Service solution (IdPaaS) for hosted IdPs. This activity aimed at investigating the business case of this solution and to create a reference design and implementation for an easy to use software solution to enable NRENS to provide an IdPaaS offering.
Activity page-
Results & Deliverables
The following results were created and delivered:
-
Ownership & Utilisation
The work has been concluded within the Incubator. samlidp.io is available as an open source software for the community and may be used by commercial vendors as well.
![photo](https://wiki.geant.org/download/attachments/148090083/metadata-push.png)
Metadata push MDQ
Metadata is at the heart of the trust fabric of current R&E Identity Federations. For the trust to properly propagate, this metadata is first collected from and then distributed by the federation towards the federation members. This activity had investigated a new proposal called "push MDQ", which introduces a new, potentially highly scalable way of distributing metadata.
Activity page-
Results & Deliverables
The following results were created and delivered:
-
Ownership & Utilisation
All changes made to the pyFF software were uploaded to the official software project to be maintained by the IdentityPython group. Furthermore, all results of the push MDQ analysis and the POC were transferred to the eduGAIN service task for further improvement of the GÉANT service.
![photo](https://wiki.geant.org/download/attachments/148090083/oidc-agent.png)
Porting oidc-agent to Windows
oidc-agent is a command line set of tools that enables the users to manage and obtain (mostly) OIDC tokens on command line. It follows the design of the ssh-agent and, as such, it can be easily integrated in the user's flow. However, current version only covers Linux and MacOS users. This activity would port the oidc-agent to Windows OS. The expected impact is potentially large, since users from many communities that may use this tool (such as HPC, or any community that need constant access to computing and storage resources as part of their work) typically rely on Windows as their main operating system. This activity investigates the best approach to porting the oidc-agent.
Activity page-
Results & Deliverables
This activity is work in progress at the time of writing.
-
Ownership & Utilisation
This activity is work in progress at the time of writing.
![photo](https://wiki.geant.org/download/attachments/148090083/oidc-op-ssp.jpg)
SimpleSAMLphp OIDC OP
SimpleSAMLphp (SSP) is a commonly used software product for both SP and IdP deployments in
Research and Education. In addition it may also be deployed as a proxy. Next to SAML, various
other authentication protocols are supported.While SSP already supports the OpenID Connect
(OIDC) Relaying Party (RP) interface, an OIDC OpenID Provider (OP) implementation is missing.
This activity seeks to implement an OIDC OP in accordance with the OIDC specification into
SSP. There is an existing module available at Github. It needs to be investigated whether this
is suitable for this activity.
-
Results & Deliverables
This activity is work in progress at the time of writing.
-
Ownership & Utilisation
This activity is work in progress at the time of writing.
![photo](https://wiki.geant.org/download/attachments/148090083/orcid.png)
ORCID as IdP of last resort
Many research collaborations as well as campus services need a solution to deal with guest identity, as in many cases not all users are members of the academic Identity Federations. As a result, several federation operators as well as research collaborations operate IdPs or proxies to allow users to authenticate through external identity providers like social ones. This has led to serious reinventing of the wheel. This pilot aimed to bring the widely used ORCID service into the GÉANT IDhub as Identity Provider of last resort. Furthermore organisational and legal aspects as well as technical improvements were investigated.
Activity page-
Results & Deliverables
The following results were created and delivered:
-
Ownership & Utilisation
The work has been concluded with the results handed over to be further developed in the IDhub to improve the GÉANT service.
![photo](https://wiki.geant.org/download/attachments/148090083/pyff.jpg)
pyFF Optimizations
pyFF is an open source and widely used product which is used to provide Discovery and Metadata
Query services for identity federation. This topic investigates optimizations in pyFF
operations, including but not limited to, performance and memory consumption. When processing
the eduGAIN metadata, pyFF memory usage balloons to the gigabytes, hereby inflicting some
extra cost when running on procured VM's like AWS. The startup/restart process speed, and
service behavior while being started/restarted may also be improved. In particular, the
service should never throw 5xx errors while in a normal startup/shutdown process.
The goal of this project is to optimize pyFF memory consumption and (re-)start behavior.
-
Results & Deliverables
The following results were created and delivered:
- pyFF test report
- Metadata mockup report
- Blog post
- Final presentation
-
Ownership & Utilisation
The aim of this activity was to investigate whether the existing pyFF software can be optimised to reduce memory consumption and improve performance. For this purpose, intensive profiling of the software was carried out and a large number of experiments were conducted. All tests and results were documented in a report, which was passed on to the developer communities of the tools.
![photo](https://wiki.geant.org/download/attachments/148090083/service-catalogue.jpg)
eduGAIN Service Catalogue
The eduGAIN Support Team, Secretariat and business development received several requests from
SPs, IdPs and NRENs for an eduGAIN Service Catalogue. Currently the eduGAIN Entities Database
tool and REFEDS Metadata Explorer Tool (MET) are the two services closest to a service
catalogue, but there are inconsistencies between the two tools.
The Incubator attempts to improve the solution based on the outcome of this pilot phase.
Depending on the requirements and use cases that need to be supported, new features can be
added in following an iterative process. If there are not enough participants to provide a
meaningful amount of data, no additional developments will be carried out by the Incubator. In
this case, the software is decommissioned at the end of the pilot phase and the project is
terminated.
-
Results & Deliverables
This activity is work in progress at the time of writing.
-
Ownership & Utilisation
This activity is work in progress at the time of writing.
![photo](https://wiki.geant.org/download/attachments/148090083/service-report.jpg)
Service Status Reporting
The T&I activities of the GEANT project run a multitude of services ranging for eduroam and eduGAIN to InAcademia, eduTEAMS and various smaller helper services for eduGAIN without a single overview of the state of all these services. The highly distributed nature limits our ability to present in a consistent way the status of these services and it hinders us in explaining issues when something is wrong. This is relevant both for members of the GEANT community as well as other other stakeholders like service owners and funding agencies. This activity wanted to create a comprehensive, high level and user friendly publicly facing service dashboard for T&I services. Since many freely or commercially available services for measuring availability already exist this activity investigated and compared them to choose a suitable solution for the GÉANT project.
Activity page-
Results & Deliverables
The following results were created and delivered:
-
Ownership & Utilisation
The result of the market analysis was provided to the T&I service task.
![photo](https://wiki.geant.org/download/attachments/148090083/shibboleth.png)
Shibboleth OIDC Extension
Up to now, R&E federations are predominantly relying on the SAML2 protocol. With upcoming needs from industry and commercial service providers the OpenID Connect (OIDC) protocol is increasingly moving into focus. This activity supported the development of an Shibboleth OIDC Extension to the Shibboleth IdP and was paving the way to make the extension a fully sustained product.
Activity page-
Results & Deliverables
The following results were created and delivered:
-
Ownership & Utilisation
The work has been concluded and the results were handed over to the Shibboleth consortium. The Extension is certified by the OIDC Foundation.
![photo](https://wiki.geant.org/download/attachments/148090083/software-testbed.jpg)
IdP/SP software testbed
It is currently very hard to test new releases of IdP and SP software against other IdP/SP products. This activity attempts to design an automated test environment. A suitable architecture for an IdP/SP continuous integration platform is to be created. This involves creating use cases and identifying technologies that support them. An iterative approach, in which use cases are successively implemented and products are integrated one after another, is intended to quickly create a functional platform. If the CI approach is successful, ready-to-use software packages can be provided using container technologies such as Docker, to deploy the entire software locally by NRENs or other parties.
-
Results & Deliverables
This activity is work in progress at the time of writing.
-
Ownership & Utilisation
This activity is work in progress at the time of writing.
![photo](https://wiki.geant.org/download/attachments/148090083/status-report.jpg)
Status Reporting & Notification
To make the global eduGAIN interfederation scalable and interoperable, it is paramount participants adhere to agreed upon standards and community best practices. There are currently already several tools that examine the quality of federation metadata, the connection status of their IdPs and the attribute release status of their IdPs. This activity is about creating a tool to aggregate information from various sources and presenting this in an attractive, easy to understand way to put this information readily into the hands of the federation operators.
Activity page-
Results & Deliverables
The following results were created and delivered:
- Source Code (closed source)
- User documentation
- Live test environment
- Final presentation
-
Ownership & Utilisation
A prototype was developed that meets the expectations of the stakeholders. The tool, in future called "eduGAIN Reporting", was handed over to the eduGAIN Task. In order to develop this further, an eduGAIN reporting development team was founded. The created prototype is used for additional tests with the users and replaced by a productive system a few months later.
![photo](https://wiki.geant.org/download/attachments/148090083/test-idp.jpg)
Test IdP
This activity creates a freely available, realistic test IdP for the GÉANT community. Based on the needs of the GÉANT community, the solution may offer SAML, OIDC and supports all the latest best practices. The requirements and use cases for such a service will be defined in collaboration with a group of community representatives. Potential features of such a tool are: test for a specific set of attributes, create an account to save a test profile, an open (REST) API to configure the IdP using a (web) client. There are different potential business cases for deployment: as part of the eduGAIN support tools, by GÉANT operations or NREN hosted.
Activity page-
Results & Deliverables
This activity is work in progress at the time of writing.
-
Ownership & Utilisation
This activity is work in progress at the time of writing.
![photo](https://wiki.geant.org/download/attachments/148090083/webauthn.jpg)
WebauthN
WebAuthn (Web Authentication), part of the FIDO2 Project, is a web standard published by the W3C that enables strong authentication with public-key cryptography, passwordless authentication, and secure two-factor authentication. The standard defines a JavaScript API which allows token registration and subsequent authentication. This activity implemented this API for the open source software SimpleSAMLphp and SATOSA, which enables them to provide 2FA functions to the benefit of the R&E community.
Activity page-
Results & Deliverables
The following results were created and delivered:
-
Ownership & Utilisation
The developed modules were submitted to the upstream repositories to be officially maintained by the simplesamlphp groups and CESNET. The software was provided to the eduTEAMS service task to include it into the GÉANT service.
![photo](https://wiki.geant.org/download/attachments/148090083/win-connector.jpg)
(De)provisioning connector for Windows
Identity provisioning and deprovisioning are a necessity for building modern authentication and authorization infrastructures. They are straightforward yet technically complicated part of identity and access management. The basic idea is to deliver identity and authorization information to the managed services, which is complicated by a lack of applicable standards in this area. Therefore, most of the Identity and access management solutions rely on a custom solution for provisioning. To overcome this obstacle, this project extends existing IAM capabilities by implementing a connector to easily provision data to services hosted on Windows OS based on SSH.
Activity page-
Results & Deliverables
The following results were created and delivered:
-
Ownership & Utilisation
The aim of this project was to create an easy to use, adoptable software solution to provision server users and provide this tool to the community As part of a case study the solution was implemented for a Czech University (Faculty of informatics MU) which will continue to use the solution afterwards. CESNET will continue to use and maintain the software for the foreseeable future. Besides this, the solution shall be adjusted to the needs of eduTEAMS. The solution will be provided to the eduTEAMS service task to be integrated into the GÉANT service.