!!! ALERT - THIS SERVICE IS UNDER TESTING !!!

Index

1. eduGAIN Connectivity Check 2148092135
2. Check performed on the IdPs
3. Statuses and results
4. Common reasons for check failure
5. eduGAIN Connectivity Check 2148092135
6. Disable Checks
7. User interface
   1. User interface parameters
8. JSON interface
9. GIT repository
10. eduGAIN Connectivity Check 2148092135

Introduction

The purpose of the eduGAIN Connectivity Check 2 is to identify eduGAIN Identity Providers (IdP) that are not properly configured. In particular, it checks if an IdP properly loads and consumes SAML2 metadata which contains the eduGAIN Service Providers (SP). The check results are published on the public eduGAIN Connectivity Check 2 web page (https://technical-test.edugain.org/eccs2/). The main purpose is to increase the service overall quality and user experience of the eduGAIN interfederation service by making federation and Identity Provider operators aware of configuration problems.

...

• https://technical-test.edugain.org/eccs2?reg_auth=http://www.idem.garr.it/&status=ERROR
• https://technical-test.edugain.org/eccs2?reg_auth=http://www.idem.garr.it/&check_result=SSL-Error

...

API interface

The eduGAIN Connectivity Check service 2 provides a JSON feed on has an API interface that provides access to the monitoring results in JSON format.

The table below describes the actions that can be performed by replacing "##ACTION##" in the URL:

...