This is a working living document, minor changes can be expected at any time.
|Table of Contents|
This document describes operational procedures implemented to support eduGAIN SAML services. It The procedures regarding eduGAIN membership are described in eduGAIN Operational Practice Statement. The Operational Practice Statement is required by the eduGAIN SAML Profile document [eduGAIN-Profile] and in addition to the Metadata the Metadata Aggregation Practice Statement must be seen as complementary to eduGAIN SAML Profile.
Under the term services listed are utilities as perceived by external users. The internal organisation of services, flow of information and dependencies are not relevant in this view, but are described in sections further down.
|Name||Access location||Description||Managed by|
|MDS||httpshttp://mds.edugain.org//edugain-v1.xml||eduGAIN Metadata Distribution Service (MDS) is the central component of the eduGAIN service as a whole. For the detailed description and procedures used in the eduGAIN metadata aggregate distributed by MDS see [eduGAIN-meta]. The eduGAIN metadata aggregate is produced on a separate, secured host (mds-feed) and it is copied to the distribution hosts and served from there by the http server. The file is updated hourly.||OT|
|The technical site||https://technical.edugain.org||The technical site is directed primarily at the federation level technical personel. It provides information about eduGAIN members, details about their participation. The technical site is also the distribution point of documentation and the home for several core and supplementary services.||OT|
|Validator||https://validatortechnical.edugain.org/validator||The eduGAIN validator is a service designed for validating metadata adherence to standards and eduGAIN requirements. The software has been created primarily as a component for the eduGAIN metadata aggregation and the details of validation rules are given in [eduGAIN-meta]. The same software enriched by a GUI is used as a tool for manual validation of metadata and serves as a support tool for federation operators.||OT|
|eduGAIN status information||This status page provides a view of the eduGAIN database in the part relevant to membership information and the current status of metadata aggregation. The page also displays short summary information about numbers of entities in eduGAIN. The interface provides links to scans of the eduGAIN declaration documents signed by federations, direct links to metadata validation, links to contacts, metadata sources etc.||OT|
|Entities database GUI||http://technical.edugain.org/entities||This service is an interface to the part of the eduGAIN database which stores information about entities themselves. The interface has many filtering mechanisms and also allows for CSV download for further processing in a spreadsheet.||OT|
|eduGAIN database API||https://technical.edugain.org/api||The API provides access to most of information stored in the database. In particular, the API may be used by the federations to monitor the eduGAIN aggregation process. Other uses are statistics of various sorts or even download of membership maps.||OT|
|Name||Access location||Description||Managed by|
|ECCS||https://technical.edugain.org/eccs/||eduGAIN Connectivity Check Service is a monitoring service for IdPs listed in eduGAIN, testing if they are actually ready for eduGAIN, i.e. if they consume eduGAIN metadata||OT|
|isFederated Check||https://technical.edugain.org/isFederatedCheck/||This tool searches all known academic identity federations for matching organisations and then displays the results.||OT|
|CoCo monitor||http://monitor.edugain.org/coco/||Monitoring service testing for REFEDS Code of Conduct compliance||SRCE|
|Technical testing platform||http://technical-test.edugain.org||This host serves as a playground for software development done by the operational team. All extensions are applied, tested and presented at this platform and then transferred to production using the git mechanism||OT|
|WIKI||The WIKI is maintained as a part of the GEANT WIKI space. The content is provided by many members of the community. WIKI serves as technical documentation, formal documentation (meeting minutes, documentation of operational procedures) and various guides on joining and making most of eduGAIN||GEANT core|
Operational Team tasks
As defined in [eduGAIN-CONST] the Operational Team (OT) is responsible for:
- Daily technical issues in central eduGAIN operations (e.g. website, central member database).
- Collaboration with the operators of each Technology Profile.
- Receiving enquiries about eduGAIN and forwarding them to the appropriate body.
- Receiving, reviewing and processing applications to join eduGAIN against basic eligibility criteria as set out in the eduGAIN Policy Declaration.
- Preparing and publishing an eduGAIN Operational Practice Statement (this document) for the eduGAIN interfederation service, covering central operations and relationship with each technology profile.
- Preparing an audit plan for the eduGAIN operational practices on the request of the eSG.
At the moment the OT also acts as the operator of the SAML technology profile.
|email@example.com||eduGAIN support mail contact|
Operational Team tasks (SAML Profile)
Management of core eduGAIN services
- management of virtual machines (access management, system maintenance - installation and updates, global backups, status monitoring)
- management of eduGAIN core services (maintenance of any software tools required by the services, monitoring of services, specialised backups)
- supervision of the aggregation function - reacting to aggregation errors, supporting federations in location of problems
- technical documentation - maintenance of user documentation of eduGAIN services
- user support - done in cooperation with the eduGAIN support team
- management of the development platform (based on the GEANT git)
- service development - configuration changes and extensions of existing services, in particular any development work within the eduGAIN MDS, validator, database
Management or supervision of supplementary eduGAIN services
- eduGAIN OT directly manages:
- isFederated check
- eduGAIN OT supervises
- CoCo monitor
The joining process support has been assigned to the Operational Team, but decision making and organising the voting process currently lies within the eduGAIN SG and its chair. The OT handles all technical details of joining, like metadata validation, signing certificate handling etc. Any paperwork is handled by the eduGAIN secretariat provided by GEANT.
operational model and availability of services
eduGAIN core function is the metadata exchange point. Federations supply their own metadata and download aggregated metadata to supplement their own and redistribute them within their federation members. Federations are strongly discouraged from pointing any of their members directly to the eduGAIN MDS. The operational baseline of MDS availibility is set at 99% for any given month. The unavailability details are provided at eduGAIN Services Status and system changes are listed at https://technical.edugain.org/system_updates.
While every care is taken that all eduGAIN services function reliably, the selected operational model allows that services updates and modifications can be done at a short-term notice allowing for a small risk of a downtime required to restore the system snapshot.
Operational Team procedures
Registration and modification of SAML profile related federation information
|information type||security level|
|federation SAML policy URL||1|
registration practice statement URL
federation SAML metadata aggregate access URL
federation metadata signing key
|registrationAuthority attribute value||3|
|S||special - delegating representatives requires contact with the federation management|
|1||informational, not requiring special vetting|
|2||important contact information (while not currently used it may be introduced in the future)|
|3||information of eduGAIN operational relevance, requires special care|
|4||crucial for eduGAIN trust, requires utmost care|
Introduction of new requirements for federation metadata feeds
Metadata requirements have direct operational impact. As described in the [eduGAIN-meta] document, a violation of the requirements results in rejection of a federation feed. The requirements as understood in this documents are the rejection rules implemented in the eduGAIN metadata validator and automatically applied in the aggregation process.
Arising problems which cause actual interoperability issues need to be handled immediately, as described in the matadata aggregation related procedures section below.
Introduction of new best current practices for federation metadata feeds
Additions to metadata best current practices need to be decided by the eduGAIN SG. Each such good practice needs to be implemented as an eduGAIN validator warning by the eduGAIN OT. Each good practice rule needs to be added to [eduGAIN-BCP].
Metadata aggregation related procedures
The technical details of the aggregation process are described in [eduGAIN-meta]. Here we only present the operational implementation of this process.
Aggregation, signing and publishing
The aggregation, signing and publishing of the eduGAIN metadata aggregate is done on an hourly basis.
- Half past every hour metadata acquisition is started on mds-feed and is pefromed in the following steps:
mds-feed downloads federation metadata feeds using conditional GET
if the conditional GET resulted in a download of a new metadata file, such file is passed through the local validator instance, if validation succeeds the downloaded file is used as an input for aggregator, if it fails, the previous correct feed copy is used instead
- the newest available validated copy of the federation metadata feed is kept for future use
the validated metadata files are passed to a pyFF flow, see also [eduGAIn-meta] Metadata combination and collision handling
pyFF aggregates and then signs the resulting feed; currently the signing is done with key files stored at the mds-feed host
the resulting file is analysed, split into entities and used to update the edugain-db
the final output is uploaded with sftp to the technical host using a dedicated user account on the the technical host
At 45 minutes past every hour the new copy of eduGAIN metadata aggregate is copied to the final destination directory and when the copy is completed the mv action is performed in order to substitute the production file in an atomic mode
Finally the new eduGAIN metadata aggregate file is copied to the history repository and compressed
- At midnight (CET) hourly copies of metadata are deleted from the repository, leaving only a single daily file. These daily files can then be used as a source of various data analysis.
Handling of aggregation alerts
As described in [eduGAIN-meta], under certain conditions aggregation alerts are raised. The current practice is that these alerts are sent as e-mails to the eduGAIN OT and to the contact address of the Federation that is affected. There is one exception to that rule - metadata unavailability alerts are sent to the OT only to avoid possible false positives caused by temporary network problems. The OT then makes its own decision when to contact the Federation.
One example of such a special situation may be a real case of an introduction of a valid but a very short-lived metadata file followed by a metadata error causing a aggregation reject. That situation, leaving no time for normal procedures to take place, was caused by a configuration error on the federation side and was rectified in a short time while the eduGAIN aggregation was suspended.
- All virtual machines running eduGAIN services are regularly updated.
- Before an update is planned, the local personel at PSNC are notified in the case of an update failure and immediate restore. An update forward notice is sent to the eduGAIN SG.
- In the case of large configuration changes, like moving services to new hosts, applying large infrastructure changes etc., a notice at least 7 days in advance is sent to the eduGAIN SG.
- All changes are documented in the log available for inspection at: https://technical.edugain.org/system_updates.
- The unavailability details are provided at eduGAIN Services Status.
Aggregator software updates
Updates to crucial aggregator elements, in particular pyFF, may result in a changed format of resulting metadata aggregate. Any such change will be announced to the eduGAIN SG mailing list. If the OT observes that the update indeed introduces changes to metadata, a beta feed will be created and announced to the SG and a change on the production will be delayed by a two-week testing period. A reminder will be issued a week before the actual change of the production feed.
- system backups are performed daily as a part of the standard PSNC backup routine
- virtual machine snapshots are performed prior to system updates
- four times a year a full virtual machine dump is performed
In the case of an unexpected problem resulting from metadtata aggregation (which may result from an unusual error on a federation side or some software bug in one of the aggregation process steps) the eduGAIN OT has access to hourly copies reaching 24 hours back and to several years of daily copies .
Restoration of snapshots or full virtual machines is possible (and has been performed several times not as disaster recovery but in order to get access to some old files for statistics reasons).
eduGAIN database description
The eduGAIN database is central to all eduGAIN core services. The database stores:
For security reasons singing keys can be present only for federations which have been approved to be a member of the eduGAIN SAML Profile.
eduGAIN Metadata Distribution Service (MDS)
eduGAIN Metadata Distribution Service (MDS) is the central component of the eduGAIN service as a whole. For the detailed description and procedures used in the eduGAIN metadata aggregate distributed by MDS see [eduGAIN-meta] and the Aggregation, signing and publishing subsection within this document. The eduGAIN metadata aggregate is produced on a separate, secured host (mds-feed). Metadata signing is also peformed on mfs-feed currently with a key file located on the host istself.
In order to minimise risks of exposing a high permissions account on the mds host the resulting aggreagate file is transferred from mds-feed to the mds host using a dedicated low permissions account. The aggregate is then moved to the final place on the mds host in a process initiated within the mds host.
Organisation and management of services
|Main access host - technical, validator, mds|
All these are CNAMEs for massonia.man.poznan.pl
eduGAIN database - edugain-db
|Function||store all data for services directly managed by the eduGAIN OT|
|The aggregation host - mds-feed|
|Function||acquire and validate federation metadata feeds, create, sign and publish the eduGAIN metadata aggregate.|
The security of the eduGAIN SAML services is essentially the security of the eduGAIN aggregate. This in turn depends on:
- The edugain-db and mds-feed hosts are located in a secured private network and can be accessed only from a single host in the PSNC network.
- The access to this single host is only available over SSH and only from a limited list of IP addresses.
- The federation signing keys can only be stored in the edugain-db with a process that needs to be run directly on the db host. This requires that the OT copy the key to the database host and run the process manually. The key is added to the database only when the decision to actually admint the federation metadata to eduGAIN has been taken. This is an additional security procedure guarding against a mistake in assigning the level of participation for a federation.
- The eduGAIN signing key is stored on the mds-feed host, where the whole process of aggregation and signing is run hourly. This host cannot be reached from the external network. The resulting signed aggregate is then moved to the distribution host as described in the Metadata aggregation related procedures section.
[eduGAIN-OPS] eduGAIN Operational Practice Statement
[eduGAIN-BCP] Best Current Practice