Our office has a /24 IPv4 and a /48 IPv6 network since 2003, and all our public services are available on IPv4 and IPv6.

This is a test to see if it would be possible to run parts of the TERENA Secretariat office network on IPv6 only.

This page keeps track of progress, bugs, and issues with this transition.
I will start with all systems and services that are used only internally.

This is not the first time this has been tried out:

• Arkko & Keranen: IPv6-Only Experiences (October 2010)

Milestones

nameserver 2001:610:148:dead::4
nameserver 2001:610:158:98d::42
domain terena.org

Specific issues

Name resolution

To avoid name resolution problems, it was sometimes necessary to copy to the legacy 127.0.1.1 entries to ::1 in the /etc/hosts file:

127.0.0.1       localhost
127.0.1.1       ldap.terena.org ldap

# The following lines are desirable for IPv6 capable hosts
::1     localhost ip6-localhost ip6-loopback ldap.terena.org ldap

127.0.0.1

On IPv6 only hosts, there is no IPv4 address configured on the network interface, so obviously all communications will go via IPv6.
There is still an IPv4 address (127.0.0.1) sitting on the loopback interface lo. It's doesn't hurt but it should not be there if the host were to be truly IPv6 only
I could not find anywhere in /etc where this address get added.
Since I can prevent it from getting added, I removed it after it gets added, by hacking configuring /etc/network/interfaces:

# The loopback network interface
auto lo
iface lo inet6 loopback
        pre-up ip addr del 127.0.0.1/8 dev lo

This seems to work fine, only now ntp dumps core, but that has been fixed as of 17 April 2011.

Skype

Skype does not support IPv6 at all. EPIC FAIL!!!! Please everybody VOTE FOR IPv6.
FYI the first request for IPv6 enabled Skype date back to 2004!!

Cisco Catalyst 3750

This switch does not support IPv6 access lists on VLANs. Needs replacing in 2011 anyway. New box might support NAT64?

Cisco AP1200

These access points do not support IPv6. Need replacing anyway. The AIR-AP1142N-E-K9 could be a drop-in replacement. Also does N.

Sharp AR-M276

This copier/printer does not support IPv6 at all.
Could not retrieve e-mail addresses for 'scan to email' after LDAP server went IPv6 only. Hack Work-around: manually put addresses in.
Our big Sharp MX2600n has IPv6 support, so we should get rid of this clunker on the first occasion.

Google Mini

This box does not support IPv6. Needs replacing in 2011 anyway, but don't forget to check!!

Axis Q1755 web cam

Can be configured to do IPv6, but only PING works
Investigate further.

Sharp MX-2600N printer

After enabling IPv6 on our Sharp MX2600N printer, the network stack actually works, but only a couple of services are running IPv6:

root@expat:~# nmap -6 2001:610:148:beef::134

Starting Nmap 5.00 ( http://nmap.org ) at 2011-03-01 10:31 CET
Interesting ports on 2001:610:148:beef::134:
Not shown: 996 closed ports
PORT    STATE SERVICE
21/tcp  open  ftp
23/tcp  open  telnet
515/tcp open  printer
631/tcp open  ipp

Nmap done: 1 IP address (1 host up) scanned in 2.29 seconds

This is in stark contrast to what runs on IPv4:

root@expat:~# nmap --system-dns 192.87.30.134

Starting Nmap 5.00 ( http://nmap.org ) at 2011-03-01 10:35 CET
Interesting ports on sharp-mx2600n.terena.org (192.87.30.134):
Not shown: 991 closed ports
PORT      STATE SERVICE
21/tcp    open  ftp
23/tcp    open  telnet
80/tcp    open  http
443/tcp   open  https
515/tcp   open  printer
631/tcp   open  ipp
5900/tcp  open  vnc
9100/tcp  open  jetdirect
50001/tcp open  unknown

Nmap done: 1 IP address (1 host up) scanned in 2.37 seconds

Now I'm trying to find out how to print using IPP from Windows 7.

Ecdysis

Some tests indicate the Ecdysis works well.
Also, they presented at our own conference last year
Take into consideration!

PECL radius

IPv6 doesn't work. Needed for TERENA web site. Update 2011-03-01: by upgrading Pear_Auth, Pear Live_User was able to use LDAP (via IPv6), without the Radius overhead.

MySQL

MySQL at this moment does not support IPv6 connections, but the development versions seem to support it (sort of). There are tools to make it work, such as https://twiki.cern.ch/twiki/bin/view/EGEE/IPv6CARE.
Not A Problem Here: we have only one host running MySQL, and that will be phased out in the future any way.

apt-get

security.ubuntu.com does not work, so no security updates. Workaround: use local mirror nl.archive.ubuntu.com for security updates.

Pear Net_Socket

Does not like IPv6 addresses, wrote patch.

ntp

ntp.ubuntu.com does not work. Use our own NTP server graham.terena.org, or one of the many SURFnet chimes.

dumps core without IPv4 loopback address. This has been fixed in Lucid and Maverick since 17 April 2011.

Confluence and JIRA LDAP auth via IPv6

Authentication on dual stack LDAP servers does not work. Using an IPv6-only hostname does work. For us this works, because our LDAP server is IPv6 only.

Radiator

Cannot use IPv6 LDAP server. Filed support ticket at Open.com.au. Fixed as of 2011-02-12. Also make sure to add flags to any custom perl hooks:
my $ldap = Net::LDAP->new('ldap://ldap.terena.org',inet6=>1);

Listmanager

This is a custom email list manager, running on Erasmus. 2 lists were doing queries to ldap.terena.org. Unfortunately the Net::LDAP in Ubuntu Hardy (libnet-ldap-perl) is too old and does not recognise the inet6 paramater. Hacked Fixed by copying /usr/share/perl5/Net/LDAP.pm from a Lucid box.

Nmap

Nmap only recognizes IPv6 resolvers by specifying "--system-dns"

Mtr

Name resolution does not work with IPv6 only name servers

Exact Globe 2003

This financial software package runs on Windows 2003 Server, which supports IPv6.
It also requires Microsoft SQL Server, and the version we run (SQL Server 2005) seems to speak IPv6 as well.
So based on that it looks like it could work.
However, after more close inspection it does not look too encouraging:

• The update process involves logging in and downloading patches from https://update.exactsoftware.com and https://eportal.exact.nl, which are IPv4 only.
• The main Exact website is IPv4 only.
• All the different sub sites are IPv4 only:
  • https://customers.exact.com/
  • https://partners.exact.com/
  • https://employees.exact.com/
• Searching for "ipv6" on the Exact website yields 0 results.
• Phoning Exact customer support if their software will work with IPv6: "What? IPv6? What kind of operating system is that?" +1 for this, but still FAIL.

Having a software package on a dedicated Windows server, with a dedicated SQL server is quite some overhead, so I was interested in their new web based product Exact Online.
The Exact Online web site (surprise surprise) can't be reached via IPv6. But if everything is just running through HTTP(S), then a NAT64/DNS64 solution might make things work.

WinSCP

Upgrade to 4.2.8 or later to get IPv6 going.

EMS PostgresQL/MySQL manager

Tunneling via SSH does not work. Native Postgres connections work, so the bug must be in sshfwd.dll.
Confirmed by EMS, but not yet fixed.

TurtoiseSVN

Works, but some weird things: I had some repositories checked out with TurtoiseSVN, using my SSH keys from Putty/Pageant. Any actions on the repository started to have a really long delay after switching off IPv4 on the subversion server. Fixed after using the right repository URL format, in my case using the Putty session name instead of the host name. This session has everything set properly already. In my case the hostname is svn.terena.org, and the PuTTY session name is svn.

Windows Remote Desktop Client

The "Remote Desktop client" in Windows 7 (mstsc.exe) has some weird behavior. An RDP connection to a Windows 7 computer using a hostname that only has a AAAA record takes 11 seconds. mstsc.exe does an A query first, gets back a No such name, then wait 11 seconds, then asks for and receives the AAAA record, and then immediately connects. |

Mac OS X

DNS

Autoconfiguring name servers does not work for Mac OS X. Macs need manually configured name servers, boo!

CIFS

CIFS client on Mac OS X does not support IPv6. Unable to file bug report due to lame web site ("An error has occurred. Please report the error to Apple Inc. by emailing the error detail to devbugs@apple.com.").

CyberDuck

CyberDuck does not work with IPv6 hostnames. Use either literal IPv6 address, or IPv6-only host name godzilla.ipv6.terena.org.
Fixed in 4.0

To Do

• VMware ESXi, Vcenter, VCB. These SHOULD work on IPv6. Curious if they really work on IPv6 only...
• Google whitelistinng our DNS servers.
• Reconfigure Nagios checks so that either IPv6, IPv4, or both are monitored.